What is the wheelbase of a 1951 Chevy sedan?
Most 1951 Chevrolet sedans used a wheelbase of 115 inches (2,921 mm).
The wheelbase is the distance between the vehicle’s front and rear axles, a key dimension that influences interior space, ride quality, and handling. In 1951, Chevrolet offered a range of body styles within a larger, roomier lineup, and the official spec for its mainstream sedans settled around the 115-inch mark, with minor variations by model and roofline.
Model coverage and variations
To understand how the wheelbase applied across the 1951 Chevrolet sedan lineup, here is an overview of typical patterns observed by historians and restorers. Exact figures can vary slightly by body style and trim level.
- Standard four-door sedans generally aligned with a wheelbase around 115 inches, reflecting the era’s emphasis on spacious interiors.
- Two-door and fastback-style sedans typically used a similar wheelbase, with minor deviations caused by roofline and chassis tweaks.
- Regional options or special-order configurations could produce slight differences, but the mainstream sedan wheelbase remained near the 115-inch figure.
In short, the characteristic wheelbase for 1951 Chevrolet sedans centers near 115 inches, with only small variations depending on body style and trim.
Practical takeaway for restorers
When restoring a 1951 Chevy sedan, verify the specific body style and consult period catalogs or an original build sheet to confirm the exact wheelbase, as there can be minor deviations among rare or regional variants.
Summary
The 1951 Chevrolet sedan family predominantly used a wheelbase of about 115 inches (2,921 mm). This dimension balanced interior space with ride and handling typical of mid‑century American sedans. For precise figures on a particular car, refer to the exact model year documentation or chassis plate information.
How long is a 1951 Chevy DeLuxe?
| Chevrolet Deluxe | |
|---|---|
| Transmission | 3-speed manual Powerglide (1950–1952) |
| Dimensions | |
| Wheelbase | 116 in (2,946 mm) |
| Length | 197.75 in (5,023 mm) 207.5 in (5,270 mm) (wagon) |
What is the wheelbase of a 1952 Chevy Styleline?
105 bhp, 235 cu. in. OHV inline six-cylinder engine with dual carburetors, three-speed manual transmission, coil-spring independent front suspension, live rear axle with semi-elliptic leaf springs, and four-wheel hydraulic drum brakes. Wheelbase: 115 in.
What is the wheelbase of a 1934 Chevy sedan?
107 inches
The 1934 Master has the longer wheelbase of 112 inches compared to the Standard model with only 107 inches, and the extra length is easily seen by the extra room and comfort found in the rear seats. The 1934 Chevy's weighs 3020 pounds. The 6 cylinder engine produces 80 horse power at 3300 rpms.
What is the wheelbase of a 1940 Chevy sedan?
Built on a 113-inch wheelbase, the 1940 Special DeLuxe Town Sedan showcased streamlined Art Deco styling, including integrated headlights, a bold “Royal Clipper” grille, and flowing fenders.
