What kind of oil does a 1988 22re take?
The 1988 Toyota 22RE engine, a popular 4-cylinder engine found in many Toyota trucks and 4Runner models, requires the use of a specific type of motor oil. According to the manufacturer's recommendations, the 22RE engine should use a high-quality, conventional or synthetic motor oil that meets the API (American Petroleum Institute) service classification of SH or SJ.
Recommended Oil Specifications for a 1988 Toyota 22RE Engine
The 1988 Toyota 22RE engine has the following oil specifications:
- Oil Type: Conventional or synthetic motor oil
- Oil Grade: SAE 10W-30 or 5W-30
- API Service Classification: SH or SJ
It's important to use an oil that meets or exceeds these specifications to ensure proper lubrication and engine protection for the 22RE engine. Using the wrong oil type or grade can lead to increased wear, reduced fuel efficiency, and potential engine damage over time.
Reasons for the Recommended Oil Specifications
The 22RE engine was designed to operate with a specific viscosity and quality of motor oil. The SAE 10W-30 or 5W-30 grade oil provides the right balance of flow and protection at different operating temperatures. The SH or SJ API service classification ensures the oil has the necessary detergents, dispersants, and anti-wear additives to keep the engine clean and well-lubricated.
Using an oil that meets these specifications is crucial for the long-term health and performance of the 22RE engine. Failure to do so can result in increased oil consumption, sludge buildup, and potentially even engine failure over time.
What is the life expectancy of a 22RE?
The 22R or RE seems to last half a million miles or more.
What kind of oil does a 1988 Toyota pickup take?
Oil Grade: SL
| Viscosity: | 10W-30, 10W-40, 10W-50 (Above -23°C) 15W-40, 20W-40, 20W-50 (Above -12°C) |
|---|---|
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 26-32 ft/lbs (Oil Drain Plug) |
What kind of oil does a 1988 Toyota 22RE take?
AMSOIL 10W-30 100% Synthetic High-Mileage Motor Oil.
What kind of oil does a 1988 Toyota 22re take?
AMSOIL 10W-30 100% Synthetic High-Mileage Motor Oil.
What kind of oil does a 1988 Chevy k2500 take?
Oil Grade: API*
5W-30 (All TEMPS) - SAE 5W-30 is preferred. Capacity: 5 quarts (with filter).
What oil does a 1989 Toyota pickup take?
FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No. F940-5QT)
How much oil does a 1989 22re take?
Capacity: 4.5 quarts (with filter).
What oil does a 92 22re take?
10W30 is fine. It's a 30 year old low power engine, so nothing special is required. You can also do 10W40 if it's easier to find.
