What kind of oil does a 2000 Dodge Intrepid take?
The quick answer: most 2000 Dodge Intrepid models require SAE 5W-30 engine oil, usable in either conventional or synthetic form. Always verify the exact specification for your engine and climate by checking the owner’s manual or the oil fill cap.
This article explains the engine options for that year and the oil recommendations, plus practical guidance for choosing oil and performing a basic oil change on a 2000 Intrepid.
Engine options and oil guidance
Because the 2000 Intrepid could be equipped with either the 2.7-liter V6 or the 3.2-liter V6, oil specifications are similar but it’s important to confirm the exact engine and climate needs. The notes below summarize typical recommendations for these engines.
- Viscosity: For both the 2.7L and the 3.2L V6 engines, 5W-30 is the common recommendation for normal operating conditions. Either conventional mineral oil or synthetic oil is acceptable.
- Climate and driving: In very hot climates or under severe service (heavy towing, extended high-speed driving), some drivers opt for 10W-30; consult the manual for approved alternatives in your area.
- Oil standards: Use oil that meets current API/ILSAC specifications. Synthetic or conventional is fine as long as it meets or exceeds the vehicle’s requirements and the brand’s quality standards.
- Capacity and service notes: Oil capacity is typically around 5 quarts (with filter) for the 2.7L; the 3.2L may require slightly more. Always verify with the dipstick and service manual for your exact configuration.
Always verify your exact engine and climate, as there can be variations by market or model year. If you can’t locate the manual, the oil fill cap on the engine or a Mopar dealer can confirm the recommended viscosity.
Practical steps for an oil change
If you’re performing the oil change yourself, follow these steps to do it safely and correctly.
- Warm the engine briefly to operating temperature, then turn off and remove the key.
- Place a drain pan beneath the engine and remove the oil drain plug to drain used oil.
- Remove and replace the oil filter, applying a light coat of new oil to the filter seal.
- Reinstall the drain plug securely, then refill with the recommended oil amount and viscosity (check the dipstick for level).
- Run the engine to circulate the oil, then turn it off and recheck the level, topping up as needed.
- Dispose of used oil properly at a recycling center or auto shop.
If you’re unsure about the steps or the right viscosity for your climate, consult a professional technician or the owner’s manual. Regular oil changes help maintain engine longevity for the Intrepid’s V6 engines.
Summary
The 2000 Dodge Intrepid typically uses 5W-30 engine oil, and you can choose conventional or synthetic formulations. Confirm the exact specification for your specific engine (2.7L or 3.2L) and climate from the owner’s manual or under-hood information. Following the recommended oil type and changing it at the prescribed intervals helps keep this classic Chrysler sedan running smoothly.
What kind of oil does a Dodge Intrepid take?
Mobil 1 – High Mileage 10W-30 Full Synthetic Motor Oil, Extends Engine Life, 5 Quart (Part No. 14995)
What kind of oil does a 2000 Dodge take?
STP High Mileage Conventional Engine Oil 10W-30 5 Quart.
What kind of oil does a 3.8 L V6 take?
5W-20
How much oil does a 2000 Dodge Intrepid 2.7 take?
Capacity: 5 quarts (with filter). After refill check oil level.
