What kind of oil does a 2013 Chevy Express van take?
The 2013 Chevy Express van takes 5W-30 motor oil. This is the recommended oil type and viscosity for this vehicle according to the manufacturer's specifications.
Detailed Explanation
The 2013 Chevy Express is a full-size van produced by General Motors. It is available in both cargo and passenger configurations, and is powered by a variety of engine options, including V6 and V8 gasoline engines as well as diesel engines.
According to the owner's manual and maintenance information for the 2013 Chevy Express, the recommended motor oil for this vehicle is 5W-30. This is a common multi-grade oil that provides good performance and protection in a wide range of operating temperatures.
- The "5W" in the oil specification refers to the oil's viscosity rating at cold temperatures, indicating it will flow easily when the engine is cold.
- The "30" refers to the oil's viscosity rating at normal operating temperatures, indicating it will provide sufficient lubrication and protection for the engine components.
It's important to use the recommended 5W-30 oil in order to maintain the engine's performance and warranty coverage. Using a different oil weight or type could potentially cause damage to the engine over time.
Oil Change Interval
The 2013 Chevy Express has an oil change interval of every 7,500 miles or 12 months, whichever comes first, according to the maintenance schedule. However, it's always a good idea to check the owner's manual or with a Chevy dealer for the most up-to-date oil change recommendations.
Regularly changing the engine oil and filter is crucial for keeping the 2013 Chevy Express running smoothly and extending the life of the engine. Neglecting oil changes can lead to increased wear, reduced fuel efficiency, and potential engine failure over time.
What oil does a Chevy Express van use?
Oil Grade: SEOC3
| Viscosity: | 0W-30 (Below -29°C) 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 8 quarts (with filter). After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) Replace drain plug seal. |
| Notes: | (1) This specification has been updated from Dexos 1 Gen 2 to GM Dexos 1 Gen 3. |
What oil does express oil use?
What synthetic oil does Express Oil Change & Tire Engineers use? We use Valvoline oil for the majority of our oil changes, but we are happy to use other brands upon request.
How much oil does a 5.3 Chevy Express take?
6 quarts (with filter).
Does it matter what oil I put in my van?
Your engine is a complex machine with hundreds of moving parts that operate under a wide range of temperatures and stresses. The oil you select needs to be equally capable of coping with these operating conditions to protect your engine against wear, corrosion, and the build-up of dirt and deposits.
What kind of oil does a Chevy 2500HD 6.0 take?
SAE 5W-30
What Kind of Oil Does a Chevy Silverado 2500 Take? You should ask for SAE 5W-30 on the new Silverado 2500s, such as the 2020, 2021, or 2022 model years.
What oil do I need for my Transit van?
What oil for Ford Transit?
| Engine Model | Recommended Oil |
|---|---|
| transit 2.0 | SAE 5W-30, 10W-30 |
| transit 2.4 diesel | SAE 5W-30, 15W-40 |
| transit custom 2.0 tdci | SAE 5W-30, 15W-40 |
| transit custom 2.0 ecoblue | SAE 5W-30, 10W-30 |
How much oil does a Chevy Express 4500 6.0 take?
Up to 6 quarts of synthetic oil. Chevrolet models only.
What oil should I put in my 350 Chevy?
Typical grades of oil that Chevy 350 owners use are 10W-30 or 10W-40. If you're running your Chevy 350 in an area with harsh winters, you may want to use an oil with a lower viscosity rating in cold conditions or check out an engine block heater.
How much oil does a 6.0 L take?
15 quarts
Capacity: 15 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
What kind of oil does a transit 350 take?
(1) Synthetic oil is required.
