What kind of oil does a 2013 Ford Edge 3.5 v6 take?
The recommended oil for a 2013 Ford Edge 3.5 V6 engine is 5W-20 synthetic motor oil. This oil grade provides the optimal balance of fuel efficiency, engine protection, and performance for this specific vehicle model and engine configuration.
Detailed Explanation
The 2013 Ford Edge is equipped with a 3.5-liter V6 engine, which is the standard powertrain option for this model year. Ford recommends using a 5W-20 synthetic motor oil to lubricate and protect the engine components. This oil grade is designed to flow easily at low temperatures during cold starts, while also maintaining sufficient viscosity at higher operating temperatures to prevent excessive wear and tear on the engine.
The 5W-20 oil specification ensures the engine receives the proper lubrication and protection required for optimal performance and longevity. Using the recommended oil type and grade is important to maintain the warranty and avoid potential engine damage or reduced fuel efficiency.
Key Considerations
- Oil Type: Ford specifies the use of a high-quality synthetic motor oil for the 2013 Edge 3.5 V6 engine.
- Oil Grade: The recommended oil grade is 5W-20, which provides the ideal balance of cold-weather fluidity and high-temperature viscosity.
- Oil Change Interval: Ford recommends changing the oil and filter every 7,500 miles or 6 months, whichever comes first, to ensure proper engine protection.
- Oil Capacity: The 2013 Ford Edge 3.5 V6 engine holds approximately 5 quarts of 5W-20 motor oil.
Following Ford's recommended oil specifications and maintenance schedule is crucial for maintaining the performance, fuel efficiency, and longevity of the 2013 Edge 3.5 V6 engine.
What is the difference between 5w20 and 5W30?
As already said, both 5W-20 and 5W-30 are the same viscosity when the engine is cold. The 5W-20, however, will remain a little thinner once you reach operating temperature to help improve fuel economy and flow fast enough to fill the tight tolerances in the engine.
What synthetic oil does Ford recommend?
For modern Ford Fusion sedans, the manufacturer suggests SAE 5W-20 or SAE 5W-30 Motorcraft full synthetic oil for the gasoline engine.
What kind of oil does a 2013 Ford Explorer engine 3.5 L V6 take?
Capacities and Specifications - 3.5L Duratec
| Name | Specification |
|---|---|
| Recommended motor oil (U.S.): Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W30-QSP | WSS-M2C945-A |
| Recommended Motor oil (Canada): Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W30-LSP12 | WSS-M2C945-A |
What kind of oil does a 2013 Ford Edge 3.5 take?
AMSOIL 5W-20 100% Synthetic High-Mileage Motor Oil.
How much oil does a 2013 3.5 take?
2013 SEL AWD 3.5L and it took 6 qts. with an oil filter change. Right on the top mark for the dipstick. If you don't let all of the oil drain out then it will of course take less.
Can I put 5w30 instead of 5w20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
Can I use 5W30 instead of 5W20 in my Ford Edge?
You'll be fine. Don't worry about the difference between 5w20 and 5w30. I accidentally put 5W-30 oil in my car when it takes 5W-20.
Is 5W-20 or 5W-30 better for high mileage?
Typically, a 5W-20 oil provides higher gas mileage than a 5W-30 due to its more effortless flow. However, the 5W-30 oil is still a suitable option where fuel efficiency is concerned. Using 5W-30 simply produces a bit less economy because moving an oil that is less freely flowing through the system consumes more energy.
What kind of oil is best in a Ford Edge?
2022 FORD EDGE Motor Oil
- Valvoline Advanced Full Synthetic Motor Oil SAE 5W-30.
- Valvoline High Mileage with MaxLife Technology Motor Oil SAE 5W-30.
- Valvoline Full Synthetic High Mileage with MaxLife Technology Motor Oil.
- Valvoline High Mileage 150K with MaxLife Plus Technology Motor Oil SAE 5W-30.
What happens if I put 5W30 instead of 5W20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
