What kind of oil does a 2013 Ram 3.6 take?
The 2013 Ram 3.6 takes 5W-20 engine oil. This is the recommended oil type and viscosity for this specific vehicle model and year.
Detailed Explanation
The 2013 Ram 3.6 is equipped with a 3.6-liter Pentastar V6 engine. Chrysler, the manufacturer of the Ram, specifies that this engine requires 5W-20 engine oil. The "5W-20" designation refers to the oil's viscosity, which determines how easily the oil flows at different temperatures.
The "5W" part indicates the oil's cold weather performance - the lower the number, the better the oil will flow in cold temperatures. The "20" part refers to the oil's thickness at normal operating temperatures. 5W-20 oil is considered a "multi-grade" oil, meaning it has a lower viscosity when cold and a higher viscosity when hot, providing optimal lubrication across a wide temperature range.
Using the recommended 5W-20 oil helps ensure proper engine lubrication and performance in the 2013 Ram 3.6. Using a different oil viscosity, such as 10W-30 or 5W-30, could potentially cause increased engine wear or decreased fuel efficiency.
Key Points:
- Recommended Oil Type: 5W-20
- Engine: 3.6-liter Pentastar V6
- Importance of Using Proper Oil: Ensures optimal lubrication and engine performance
In summary, the 2013 Ram 3.6 requires 5W-20 engine oil to maintain proper lubrication and performance of the 3.6-liter Pentastar V6 engine. Using the recommended oil type is crucial for the long-term health and efficiency of this vehicle.
Can I use 5W-30 instead of 5W-20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
How much horsepower does a 3.6 L Dodge engine have?
305 HP
2022 Ram 1500 Engine Differences
| Engine Options | 3.6L V6 with eTorque | 5.7L HEMI® V8 |
|---|---|---|
| Horsepower | 305 HP | 395 HP |
| Torque | 269 lb.-ft. | 410 lb.-ft. |
| Towing | 7,730 lbs. | 11,610 lbs. |
| MPG (city/hwy) | 20 / 26 | 15 / 22 |
How much oil does a 2013 3.6 Pentastar take?
six quarts
For JK Wranglers from 2012-2018 with the Pentastar 3.6L engine, Mopar recommends using six quarts of 5W-20 oil, however you can also use 5W-30 depending on what type of driving conditions you expect to encounter.
What is the difference between 5W-20 and 5W 30?
The 5W-20 will remain a little thinner at operating temperature, as indicated by its lower “20” number, while 5W-30 will provide a slightly thicker lubricating film. When looking at 5W-30 vs 10W-30, they both provide the same viscosity at operating temperature, as indicated by their identical “30” ratings.
What kind of oil does a 2013 Dodge Ram 3.6 take?
The 3.6L Pentastar® V6 engine takes a synthetic blend oil. It's preferred that you use one with an oil weight of SAE 0W-20.
How much oil does a 3.6 L V6 RAM take?
Oil Grade: SEO11
| Viscosity: | 5W-20 (All TEMPS) - Mopar SAE 5W-30 engine oil approved to the manufacturer material standard MS-6395 may be used when SAE 5W-20 engine meeting MS-6395 is not available. |
|---|---|
| Capacity: | 5.9 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What oil does a Dodge 3.6 L take?
I have used Penzoil Platinum 5W-20 since taking delivery of my new 2016 SXT Plus Challenger. It meets the Dexos requirements and all other FCA specs, plus it's a full synthetic which is a higher grade than conventional oils.
How much horsepower does a 2013 3.6 Pentastar have?
292-hp
Chrysler has announced a series of running equipment and model changes for the 2013 300 sedan, and the gist is this: The 292-hp, 3.6-liter Pentastar V-6 engine and eight-speed automatic introduced to the line last year now are standard on every 2013 300.
Is 0W-20 the same as 5W-20?
The 0W or 5W refers to the pumpability in cold temperatures. Therefore, a 0W would flow more easily than a 5W and could be an acceptable substitute. Thus, it is suitable to use a SAE 0W-20 as a replacement for SAE 5W-20 application. **Offers same protection as 5W but also provides faster flow and better fuel economy.
What kind of oil does a 3.6 Pentastar take?
The recommended oil type for the 2024 Jeep 3.6 Pentastar engine is 5W-30 full synthetic motor oil. Full synthetic oils are engineered for superior performance, providing better protection against heat and wear, which is essential for modern high-performance engines.
