What kind of oil does a 2016 Honda Odyssey take?
The 2016 Honda Odyssey uses 0W-20 synthetic motor oil, with a capacity of about 5.6 quarts including the filter.
Oil type and specifications
For the 3.5-liter V6 engine in this model year, Honda specifies a 0W-20 viscosity that meets API SN and ILSAC GF-5 standards. Choosing the right oil helps with cold-start protection, efficiency, and overall engine longevity.
- Viscosity: 0W-20
- Oil type: Synthetic or fully synthetic motor oil
- Certification/spec: API SN and ILSAC GF-5
- Oil capacity (with filter): Approximately 5.6 quarts
- Filter: Honda-approved oil filter or equivalent
Sticking to these specifications supports reliable lubrication and helps maintain expected performance and warranty terms.
Oil-change considerations
If you plan to change the oil yourself or want to understand the maintenance needs, keep these practical points in mind.
- Ensure the engine is warm, then place a drain pan underneath the vehicle and remove the drain plug to let old oil flow out.
- Remove the old filter, install a new filter with a light coating of new oil on the seal, and reinstall the drain plug securely.
- Pour in the recommended 0W-20 oil in stages, checking the level with the dipstick to reach the correct mark.
- Start the engine and run briefly to circulate the oil, then re-check for leaks and correct the oil level again if needed.
- Dispose of used oil and the old filter at a proper recycling facility.
Following these steps helps ensure a clean, effective oil change and protects the engine.
Summary
In brief, a 2016 Honda Odyssey requires 0W-20 synthetic motor oil, with an approximate capacity of 5.6 quarts including the filter. Use a compliant oil that meets API SN and ILSAC GF-5 standards, and follow the vehicle’s maintenance minder for change intervals to keep the engine running smoothly.
