What kind of oil does a 2018 Ford Edge 3.5 take?
The 2018 Ford Edge with the 3.5-liter V6 typically uses 5W-20 engine oil, and it should be synthetic or synthetic-blend that meets Ford specifications.
Oil grade and Ford specifications
Key factors to consider before choosing oil for the Edge 3.5 are viscosity, synthetic content, and whether the oil meets Ford's certification.
- Viscosity: 5W-20 SAE
- Oil type: Synthetic or synthetic-blend
- Ford specification: Oil should meet Ford WSS-M2C946-A (and, in some production batches, WSS-M2C930-A). Verify the exact spec in your owner's manual or with a dealer.
- Capacity: Approximately 5.0 quarts (with filter)
- Branding: Ford Motorcraft 5W-20 or any brand that meets the Ford specification
Following these guidelines helps ensure proper lubrication, engine performance, and warranty coverage. Always confirm the exact specification for your vehicle’s VIN in the manual or with a Ford service adviser.
Maintenance and practical tips
Here are practical steps to implement and maintain the correct oil in your Edge 3.5.
- Choose oil that meets the spec above (5W-20 synthetic or synthetic-blend).
- Purchase about 5 quarts of oil with a new oil filter; have a drain pan ready for an oil change.
- Drain the old oil, replace the oil filter, and refill with fresh oil up to roughly 5 quarts, then check the level with the dipstick.
- Run the engine for 1–2 minutes, turn it off, wait a few minutes, and recheck the level; top off if needed.
- Dispose of used oil and filter at an approved recycling center.
Regular oil changes using the correct oil help maintain engine efficiency and longevity. Follow the maintenance schedule in your owner's manual and consult a Ford dealer if you’re unsure about the exact specification for your VIN or climate.
Summary
For a 2018 Ford Edge with a 3.5-liter V6, use 5W-20 engine oil—synthetic or synthetic-blend—that meets Ford specifications (commonly WSS-M2C946-A). The approximate oil capacity is 5.0 quarts with a filter. Always verify the exact specification for your VIN and climate, and adhere to the maintenance guidance in your manual to ensure optimal performance.
