What kind of oil does a 3.6 Dodge Caravan take?
The standard oil for the 3.6L Pentastar engine in the Dodge Grand Caravan is SAE 5W-20 motor oil, typically in a full synthetic or synthetic-blend formulation that meets API SN or newer. Always verify the exact specification for your year and climate in the owner's manual.
In this article, we break down the recommended oil type, capacity, and maintenance guidance for the 3.6L engine, so you can keep your minivan running smoothly in daily use or on longer trips.
Recommended oil viscosity and specifications
Most Dodge/Chrysler manuals for the 3.6L Pentastar specify a 5W-20 viscosity that meets API SN or newer standards. Using a full synthetic or synthetic-blend oil provides better protection and longer drain intervals.
Common oil choices that meet the 3.6L Pentastar spec include the following:
- 5W-20 full-synthetic motor oil that meets API SN or newer (and ILSAC GF-6 or newer) standards.
- 5W-20 synthetic-blend motor oil that meets API SN or newer (and ILSAC GF-6 or newer) standards.
Bottom line: Choose a high-quality 5W-20 oil that complies with current API and ILSAC standards. Always consult your owner's manual for any region-specific guidance or exceptions.
Oil capacity and service tips
The 3.6L V6 engine generally holds about 5.5 quarts of oil with a new filter. Always verify the level with the dipstick after a refill and run the engine to operating temperature before rechecking.
Change intervals and monitoring
With synthetic oil, the drain interval is typically up to 7,500 miles (12,000 km) under normal driving conditions. With conventional oil, intervals are usually about 3,000–5,000 miles (5,000–8,000 km). If your vehicle is equipped with an oil life monitor, follow its guidance to optimize changes. Extreme heat, towing, or severe driving can shorten intervals.
Summary
For the 3.6L Pentastar engine in the Dodge Grand Caravan, use SAE 5W-20 motor oil, preferably a full synthetic or synthetic-blend that meets API SN (or newer) and ILSAC GF-6 (or newer) standards. The typical oil capacity is around 5.5 quarts with filter, and change intervals vary by oil type and driving conditions, with longer intervals possible when using synthetic oil. Always refer to the specific year’s owner's manual for exact specifications and maintenance guidance.
How much oil does a 3.6 l Dodge Van take?
5.6 litres (with filter).
What kind of oil does a Dodge Caravan 3.6 take?
5W-20
Fits 2014-2021 Dodge Grand Caravan 3.6L models. See vehicle fitment tab to confirm fitment. 6 liters 5W-20 Dodge Grand Caravan engine oil and oil filter for 3.6L V6 applications. Meets or exceeds recommended FCA MS-6395 motor oil quality standard using advanced RAVENOL USVO CleanSynto synthetic oil technology.
How much oil does a 2019 Dodge Grand Caravan 3.6 L take?
A 2019 Dodge Grand Caravan with a 3.6L engine takes approximately 6 quarts of oil, with a capacity of 5.9 quarts (with filter) specified in some resources. It is crucial to add about 6 quarts and then check the level with the dipstick, as different engines may have slight variations. The recommended oil type is 5W-20 synthetic.
- Oil capacity: 5.9 quarts (with filter) or approximately 6 quarts.
- Recommended oil: 5W-20 synthetic oil.
- After refilling: Always check the oil level with the dipstick to ensure it is between the "min" and "max" marks.
What oil does a Dodge 3.6 V6 take?
The recommended oil for a Dodge 3.6L engine is SAE 0W-20 full synthetic motor oil, though some sources state that SAE 5W-20 is also acceptable and that SAE 5W-30 can be used in hotter climates. The engine typically requires 6 quarts of oil.
Oil type and weight
- Primary recommendation: SAE 0W-20 full synthetic oil.
- Alternative options:
- SAE 5W-20 full synthetic is often listed as an acceptable alternative.
- SAE 5W-30 synthetic can be used, especially in hot climates, according to some sources.
Oil capacity
- The 3.6L V6 engine typically requires 6 quarts of oil.
Important notes
- Always check your vehicle's owner's manual for the most accurate and up-to-date information, as specifications can vary by model year and specific vehicle.
- The oil must meet the manufacturer's specifications, such as the Mopar API certification.
