What kind of oil does a Acura Legend take?
The Acura Legend generally uses 5W-30 engine oil, and you can opt for conventional or synthetic depending on your priorities and climate. In very hot environments or for engines with higher mileage, 10W-30 can be acceptable if recommended by the owner's manual. Always verify the exact grade on the oil cap or in the manual for your specific year and engine variant.
Oil requirements by Legend variant and climate
The Legend was offered with different V6 engines over its production run. While the exact grade can vary by year and engine, the standard starting point for most Legends is 5W-30. If you live in a very hot climate or your engine has higher mileage, 10W-30 may be used where the manual permits. Always check the owner’s manual and the underside of the oil filler cap for the precise specification.
- Most Acura Legends with common V6 engines: 5W-30 engine oil (conventional or synthetic) meeting API service category SN or newer and ILSAC grade; confirm viscosity on the cap/manual.
- In hot climates or for older/high-mileage engines when permitted by the manual: 10W-30 can be used as an alternative to 5W-30.
Concluding paragraph: The practical takeaway is that 5W-30 is the typical starting point for most Legends; adjust to 10W-30 only if your manual allows and climate/wear conditions warrant it.
Conventional vs synthetic oil for the Legend
Choosing between conventional and synthetic oil depends on driving conditions, maintenance preferences, and the engine’s age. Here’s how to decide:
- Conventional 5W-30: Quietly effective, cost-efficient, and adequate for standard daily driving and original service intervals.
- Synthetic 5W-30: Superior oxidation resistance, better cold-start performance, and longer drain intervals; beneficial for extreme temperatures or if you want extended changes.
- Synthetic blends or higher-grade synthetics: Can offer extra protection in demanding conditions, but ensure compatibility with your engine and oil cap rating.
Concluding paragraph: Regardless of choice, use oil that meets the car’s API rating and viscosity as specified in the manual and keep to recommended drain intervals to protect the aging engine.
Practical steps before your next oil change
Prepare with a quick checklist to ensure you use the correct oil and maintain the engine well:
- Verify the exact viscosity and API/ILSAC rating specified for your year and engine in the owner's manual or on the oil cap.
- Choose either conventional 5W-30 or synthetic 5W-30 (or 10W-30 if permitted) based on climate and mileage.
- Replace the oil filter with the recommended part and use the correct fill quantity as stated for your engine.
- Reset or note the oil-life indicator if equipped, and schedule the next drain interval accordingly.
Concluding paragraph: Following these steps helps ensure the Legend’s V6 engine remains properly lubricated and protected over time.
Bottom line
Summary: For most Acura Legends, start with 5W-30 oil and adjust only if the manual permits a different viscosity. Choose conventional or synthetic based on climate, mileage, and maintenance goals, and follow recommended drain intervals to keep the Legend’s V6 engine performing well over time.
What kind of oil does a 1995 Acura Legend take?
SAE 5W-30
Engine Oil. 5W-30 (All TEMPS) - SAE 5W-30 is preferred. Capacity: 4.8 quarts (with filter).
What kind of oil does a 3.6 L V6 take?
A 3.6L V6 engine typically takes either 0W-20 or 5W-20 full synthetic oil, depending on the vehicle's year and manufacturer. Some older models or specific driving conditions might recommend 5W-30, but you should always consult your owner's manual for the specific viscosity and oil type recommended for your exact vehicle.
Oil type by vehicle age
- Newer vehicles: Many newer models, especially those with tighter engine tolerances, specify 0W-20 full synthetic oil.
- Older vehicles: Older models may specify 5W-20, which can also be a good option.
Choosing the right oil
- Check your owner's manual: Always check your vehicle's owner's manual for the precise oil specification. This is the most accurate source of information.
- Consider climate and driving conditions:
- 0W-20 and 5W-20: These are standard for most modern vehicles to improve fuel efficiency and provide good cold-weather protection.
- 5W-30: Some manufacturers state that 5W-30 can be used in certain situations, like hot climates or under severe duty conditions.
- Full synthetic: While conventional oil may be an option, full synthetic oil is often recommended for better protection and potentially longer change intervals.
Can I use 5w30 instead of 5W20 in my Acura?
Everywhere else in the world besides the US, depending on climate, Acura/Honda suggests different viscosities in our J32/J35 engines, ranging from 5w20-10w40. These engines were designed to run on 5w30. You aren't going to hurt anything. Especially if you live somewhere hot.
What kind of oil does a 1992 Acura Legend take?
SAE 5W-30
Oil Grade: API*
| Viscosity: | 10W-30 (Above -7°C) 5W-30 (All TEMPS) - SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 5 quarts (with filter). After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
