What kind of oil does a Acura ZDX take?
The Acura ZDX's 3.7L V6 typically requires 5W-20 synthetic motor oil, about 5.9 quarts with a filter. Always check your owner's manual for your year and climate.
Oil specifications for the Acura ZDX
The ZDX uses a 3.7-liter V6 engine (the J37A family) and follows Honda/Acura lubrication guidelines that emphasize a light-viscosity synthetic oil for fuel efficiency and reliable cold-weather startup. The standard recommendation across model years is 5W-20 synthetic oil. Oils should meet API SN or newer and the ILSAC GF-5 standard or newer, with Honda/Acura Genuine Oil or an approved equivalent preferred.
Viscosity and oil type
Before selecting oil, confirm the exact viscosity and specification for your year and climate. The information below reflects common guidance for the ZDX's 3.7L V6.
- Viscosity: 5W-20 is recommended for most conditions.
- Oil type: Synthetic or synthetic-blend motor oil is preferred.
- Specifications: Oils should meet API SN (or newer) and ILSAC GF-5 (or newer) standards.
- Branding: Honda/Acura Genuine Oil or an equivalent that meets the above specs is recommended.
- Capacity: Roughly 5.9 quarts (about 5.6–6.0 quarts) with a new filter.
In practice, using an oil that matches these specs will help ensure proper lubrication and engine longevity for the ZDX's 3.7L V6.
Oil change interval and maintenance
Oil change intervals depend on driving conditions and the oil type you use. The following guidelines are typical for the ZDX, but you should follow the schedule in your owner's manual.
- With synthetic oil, a common interval is about 7,500 miles or 12 months, whichever comes first.
- With conventional oil, intervals are shorter, typically around 3,000–5,000 miles or 6 months.
- Always replace the oil filter at each oil change and use the correct drain plug torque when refilling.
- Check the oil level regularly with the dipstick and top up only with the same spec oil if needed.
Following these guidelines will help maintain engine health and performance for the ZDX.
Summary
The Acura ZDX uses 5W-20 synthetic motor oil (about 5.9 quarts with a filter). Use oil that meets API SN or newer and ILSAC GF-5 or newer, preferably Honda/Acura Genuine Oil or equivalent. Always consult the owner's manual for your exact model year and driving conditions to confirm the specifications and change intervals.
How much oil does a 3.0 L 6 cylinder take?
A 3.0L V6 engine typically takes between 4.5 and 6.5 quarts of oil, but the exact amount depends on the specific vehicle make and model. For example, a 2006 Ford Fusion 3.0L V6 requires 6 quarts, while a 2001 Jaguar S-Type 3.0L V6 needs 6.5 quarts. Always check your vehicle's owner's manual for the precise capacity and oil viscosity requirements.
| Vehicle | Oil Capacity |
|---|---|
| 2012 Ford Escape 3.0L V6 | 6 quarts |
| 2006 Ford Fusion 3.0L V6 | 6 quarts |
| 2003 Ford Ranger 3.0L V6 | 4.5 quarts |
| 2001 Jaguar S-Type 3.0L V6 | 6.5 quarts |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_GNclaYXMH9Khi-gPsNGbwQk_312';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
Can I use 5w30 instead of 5w20 in my Acura?
Everywhere else in the world besides the US, depending on climate, Acura/Honda suggests different viscosities in our J32/J35 engines, ranging from 5w20-10w40. These engines were designed to run on 5w30. You aren't going to hurt anything. Especially if you live somewhere hot.
What type of oil does Acura use?
The recommended Acura oil type is 0W-20 full synthetic for most modern models (post-2011), while older models may require 5W-20 or 5W-30. For best performance and protection, use a full synthetic oil with the correct SAE weight, ideally one that is API Certified or is the official Acura Genuine Engine Oil.
Recommended oil types by model year
- 0W-20 full synthetic: Recommended for most models from around 2011 or 2013 onward, including the ILX, MDX, RDX, and TLX.
- 5W-20: Suitable for some models from 2004 to 2013, including certain MDX and TL models.
- 5W-30: Recommended for some older models, such as certain TL and RDX models from the 1999-2003 and 2007-2012 ranges, respectively.
How to choose the right oil
- Always check your owner's manual: This is the most accurate source for your specific vehicle's requirements.
- Use full synthetic: Acura recommends full synthetic oil for its superior protection, performance, and ability to withstand extreme temperatures.
- Look for the API Certified Starburst: If Acura Genuine Oil is unavailable, choose an oil with the API Certified Starburst symbol, which indicates it provides superior performance and protection.
- Consider oil weight: The "W" in the oil weight (e.g., 0W-20) indicates the oil's viscosity. The correct weight is crucial for proper engine lubrication and performance, so follow the manufacturer's recommendation.
What kind of oil does a 2010 Acura ZDX take?
Genuine Acura oil change kit 2010 Acura ZDX 3.7L Full Synthetic engine oil 5w20.
