What kind of oil does a Ford excursion take?
The Ford Excursion, a large SUV produced from 1999 to 2005, typically requires 5W-30 or 5W-20 motor oil. The specific oil type recommended for your Excursion will depend on the model year and engine configuration, so it's important to consult your owner's manual or a trusted mechanic to determine the right oil for your vehicle.
Recommended Oil Types for the Ford Excursion
The Ford Excursion was available with a variety of engine options, including V8 and diesel engines. The recommended oil type can vary depending on the engine, but here are some general guidelines:
- 5W-30 or 5W-20 synthetic blend or full synthetic motor oil is recommended for most Excursion models.
- Diesel-powered Excursions may require a higher-quality 5W-40 or 15W-40 diesel engine oil.
- Some earlier model year Excursions may have been designed to use conventional 5W-30 motor oil.
It's important to follow the manufacturer's recommendations to ensure your Excursion's engine is properly lubricated and protected. Using the wrong oil type can lead to increased wear, reduced fuel efficiency, and other performance issues.
Changing the Oil in a Ford Excursion
In addition to using the correct oil type, it's also important to change the oil in your Ford Excursion at the recommended intervals. Most manufacturers suggest changing the oil every 5,000 to 7,500 miles, or every 6 to 12 months, whichever comes first. Be sure to use a high-quality oil filter as well to ensure optimal engine protection.
By following the manufacturer's recommendations for oil type and change intervals, you can help ensure your Ford Excursion runs smoothly and efficiently for years to come.
How many quarts of oil does a 6.0 L lq4 take?
6 quarts
5W-30 (All TEMPS) - SAE 5W-30 is preferred. Capacity: 6 quarts (with filter).
What type of oil does a 7.3 powerstroke take?
We recommend the reliability of synthetic oils designed for maximum performance. There are several factors you should consider when choosing the best oil for your 7.3 Powerstroke: Viscosity: It's usually best to choose 10W-30 viscosity rating oils for normal, lighter-duty operation.
What oil does a 2005 6.0 powerstroke take?
Oil Grade: SEO84
10W-30 (-23 To 32°C) - Ford TSB 05-16-6 states that SAE 10W-30 is acceptable to use in operating temperatures from -1 C (31 F) to 32 C (90 F).
How much oil does a 7.3 Excursion take?
15 quarts
Capacity: 15 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
What kind of oil does a 2004 Ford Excursion 6.0 take?
Engine Oil
SAE 10W-30 is the preferred viscosity if the operating varies from -20 C (-4 F) to -1 C (31 F). 15W-40 (Above -12°C) - Ford TSB 05-16-6 states that SAE 15W-40 is acceptable to use in operating temperatures from -12 C (11 F) to -1 C (31 F).
How often should I change the oil in my 7.3 powerstroke?
every 7,500 miles
Oil and Filter - Oil change service intervals should be completed as indicated by the instrument cluster message center or every 7,500 miles. Fuel Filter Change - Change every 3rd oil change or every 15000 miles(24,140 km) or as indicated by the message center which ever comes first.
What oil does a Ford 6.8 V10 take?
Blue Bird Vision Ford 6.8L current manuals list either 5W-20 or 5W-30 Engine Oil Requirements. The current oil fill cap is labeled 5W-20. Install a new oil fill cap labeled 5W-30 upon receipt. At your next and all subsequent oil changes, Blue Bird's only recommendation is the use of 5W-30 motor oil.
How much oil does a 6.8 Ford Excursion take?
six-quart
A. According to my technical source at Ford, all of the V-10 6.8L engines have a six-quart oil capacity with filter change.
What kind of oil does a 2000 Ford Excursion 6.8 take?
Oil Grade: SEO15
5W-20 (All TEMPS) - This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity.
What kind of oil does a 2004 Ford Excursion 5.4 take?
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
