What kind of oil does a Ford Transit Custom 2.0 Tdci take?
The Transit Custom 2.0 TDCi typically uses a fully synthetic 5W-30 engine oil that meets Ford’s specification WSS-M2C934-B. Always verify the exact specification for your year and engine variant in the owner’s manual or with a Ford dealer.
In this article, we break down the common oil options, how to match the right viscosity and Ford specification to your engine, and practical tips for checking and changing oil in the Transit Custom. Oil requirements can vary by model year and climate, so it’s important to confirm the precise needs for your vehicle.
Common oil grades and Ford specifications
Oil choice depends on the engine variant and year. The modern 2.0 TDCi EcoBlue engines used in most Transit Customs typically require 5W-30 synthetic oil that meets Ford WSS-M2C934-B; some older 2.0 TDCi engines may use a different Ford specification. Always confirm the exact spec for your vehicle.
- 5W-30 fully synthetic oil meeting Ford WSS-M2C934-B (most common for EcoBlue 2.0 TDCi).
- Some older engines or regional specs may require Ford WSS-M2C913-C or another Ford-approved specification.
- Other compatible grades (such as 0W-30 or 5W-40) are only acceptable if explicitly approved in your manual or by Ford for your engine/year.
When selecting oil, ensure it is a genuine full synthetic and clearly lists the Ford specification on the container. Using the wrong spec or a non-approved oil can affect engine wear and warranty coverage.
Climate and driving conditions influence viscosity
In cold climates, a lighter viscosity like 0W-30 may be permitted if Ford specifies it for your engine and year, improving cold-start performance. In hot climates or under heavy use, 5W-40 might be recommended if approved by Ford for your exact engine. Always follow the approved viscosity for your vehicle’s engine, year, and region.
- Cold climates: 0W-30 synthetic if Ford-approved for your engine/year.
- Hot climates or high-load use: 5W-40 synthetic if Ford-approved for your engine/year.
Bottom line: stick to the viscosity and Ford specification approved for your exact engine and year. Mixing oils or using non-approved grades can shorten engine life and may void warranties.
How to confirm the exact oil for your Transit Custom
To ensure you’re using the correct oil, follow these steps:
- Check the owner’s manual and the engine oil cap for the recommended viscosity and Ford specification (for example, 5W-30 with WSS-M2C934-B).
- Look for oil packaging that lists the Ford specification on the label (WSS-M2C934-B or the applicable specification for your year).
- When in doubt, contact a Ford dealer or a qualified mechanic with your VIN to confirm the precise requirement for your engine and year.
Ensure you service with the correct oil and follow Ford’s recommended service intervals. For many Transit Custom fleets, oil change intervals are around 12,000 miles or 12 months, but actual intervals depend on usage and warranty terms.
Maintenance tips for oil care
Pouring in the correct oil and keeping up with changes helps maintain fuel efficiency, emissions compliance, and engine longevity. Always top up with the same oil type and grade if you’re briefly below the required level, and replace the oil filter at the next service.
Summary: The Ford Transit Custom 2.0 TDCi generally requires a 5W-30 fully synthetic oil that meets Ford WSS-M2C934-B (with some older variants possibly using WSS-M2C913-C). Confirm the exact specification for your year and engine variant via the owner’s manual or a Ford dealer, and use only oils approved for your engine.
