What kind of oil does a Honda Crosstour take?
The Honda Crosstour’s 3.5-liter V6 typically requires 5W-20 synthetic oil, though some early-year models or specific markets may call for 0W-20. Always verify by checking your owner’s manual or the oil cap.
Oil specifications for the Crosstour depend on year and market. The vehicle shares its V6 with other Honda models, and the exact grade, capacity, and change intervals are spelled out in the manual for your particular car. The guidance below covers common cases and how to confirm the right oil for your Crosstour.
Oil grade and specification
The Crosstour’s standard engine is a 3.5L V6 that generally uses 5W-20 synthetic oil, meeting ILSAC GF-5 (or GF-6) standards and API SN or newer. Some older or market-specific editions may list 0W-20. In all cases, use an oil that meets the current Honda specification and the ILSAC standard.
Notes on grade and compatibility
Always verify the exact grade on the oil fill cap or in the owner’s manual for your year and trim. If your manual specifies 0W-20, use that; if it calls for 5W-20, use that. If it allows 5W-30 under certain conditions, follow the manual's guidance.
Common oil grades and compatibility notes for the Crosstour:
- 5W-20 synthetic engine oil (meets ILSAC GF-5 or GF-6, API SN or newer) as the standard recommendation for most Crosstour models with the 3.5L V6
- 0W-20 synthetic engine oil (specifically listed for some year/market Crosstour models; follow the manual or oil cap)
- 5W-30 synthetic oil (acceptable only if your owner's manual or dealer specifies it for your climate or engine variant)
- Use full-synthetic oil for best protection; if using conventional or blend oil, follow the manual's guidance
Choosing the right grade hinges on your year and market; always verify by manual or the oil fill cap.
Oil capacity and change interval
Know the practical numbers so you can plan a maintenance schedule. The 3.5L V6 Crosstour typically holds about 5 quarts of oil with a filter; exact capacity can vary by model and installed filter.
Common change intervals are to follow the manual depending on oil type and driving. With full synthetic oil, many Crosstour owners follow roughly a 7,500-mile (12,000 km) interval under normal conditions; with conventional oil, shorter intervals around 3,000-5,000 miles may apply. Always rely on the owner’s manual and the maintenance minder if equipped.
- Approximately 5 quarts of oil with a filter (verify on the dipstick or owner's manual for your exact model)
- With synthetic oil, typical interval is around 7,500 miles under normal driving; with conventional oil, 3,000-5,000 miles
- Use a quality oil filter and a filter that meets Honda specifications or OEM equivalents
- Regularly check the oil level and top up if necessary, especially in extreme temperatures or after long trips
In sum, capacity is around 5 quarts; use synthetic oil when possible; follow the official change intervals from your manual.
Brands and where to buy
Brand choice is broad as long as the oil meets the recommended grade and ILSAC/API standards. Popular full-synthetic options include Mobil 1, Castrol, Valvoline, Pennzoil, and Royal Purple. Always confirm the grade and specification on the bottle and ensure it meets ILSAC GF-5 or GF-6 and API SN or newer. Your local Honda dealer can stock OEM-approved oil.
Summary
Bottom line: For the Honda Crosstour, the typical oil is 5W-20 synthetic for the 3.5L V6, with 0W-20 as a possible alternative on some years. Always check the owner’s manual or the oil cap for the exact specification and capacity, and follow the manufacturer’s recommended change interval. Using a high-quality full-synthetic oil that meets ILSAC GF-5 or GF-6 and API SN or newer will provide the best protection for the Crosstour’s V6 engine.
What kind of oil does a 2010 Honda Crosstour take?
The recommended oil for a 2010 Honda Crosstour is 5W-20 or 0W-20 full synthetic oil. While both are compatible, the owner's manual for your specific vehicle will be the most accurate source, or you can also check the oil filler cap on the engine.
- Check the owner's manual: This is the most reliable source for the exact recommendation.
- Look at the oil filler cap: The cap on top of the engine will have the recommended viscosity printed on it.
- Use 5W-20 or 0W-20: You can use either 5W-20 or 0W-20 full synthetic oil. 0W-20 is a common replacement and is often recommended in service bulletins, but 5W-20 is also acceptable.
- Capacity: The oil capacity is approximately 4.5 quarts for the 3.5L V6 engine when changing the filter.
- Oil filter: Use a new oil filter when you change the oil.
What kind of oil does a 2014 Honda Crosstour take?
The 2014 Honda Crosstour requires 0W-20 full synthetic motor oil. When replacing the oil and filter, you will need about 4.5 quarts, while changing the oil without the filter requires approximately 4.2 quarts.
- Oil Type: 0W-20 Full Synthetic
- Capacity with filter: 4.5 quarts
- Capacity without filter: 4.2 quarts
- Important notes: Always check the oil level with the dipstick after refilling to avoid overfilling. You should also install a new washer on the drain bolt and use only an original equipment (OE) drain plug.
Can I put 5W-30 instead of 5W-20 on a Honda Accord?
You can likely use 5W-30 instead of 5W-20 in your Honda Accord, but you should check your owner's manual first, as the recommended oil can vary by model year and engine. Using a slightly thicker oil is sometimes done for older or high-mileage engines, but it may slightly decrease fuel economy, as the lighter 5W-20 is often specified for better efficiency.
Potential effects of using 5W-30
- Fuel economy: Thicker oil requires more energy to pump, which can lead to a slight reduction in gas mileage.
- Engine performance: Engineers design engines for specific oil viscosities. Sticking to the recommended 5W-20 ensures optimal performance and protection according to the manufacturer's specifications.
- Engine wear: In some cases, using a heavier oil in a high-mileage engine might be beneficial, especially if you're experiencing oil consumption issues. Some mechanics recommend a 5W-30 in older Honda engines to help with this, but it can also increase engine friction if the engine wasn't designed for it.
What to do
- Check your owner's manual: The most important step is to consult your car's owner's manual for the exact oil viscosity recommendation for your specific model and engine.
- Consult a mechanic: If you're concerned about your engine's performance or have a high-mileage vehicle, a mechanic can provide advice tailored to your car's condition.
What type of oil does a Honda Crosstour take?
Mobil 1 – Advanced 0W-20 Full Synthetic Motor Oil, Improves Fuel Economy, 5 Quart (Part No. 44967)
