What kind of refrigerant does a 2010 Dodge Avenger take?
The 2010 Dodge Avenger uses R-134a refrigerant in its air conditioning system. R-134a is a hydrofluorocarbon (HFC) refrigerant that has been the standard for most passenger vehicles since the phase-out of R-12 (Freon) in the mid-1990s.
Refrigerant Requirements for the 2010 Dodge Avenger
The 2010 Dodge Avenger, like most vehicles of that era, was designed to use the R-134a refrigerant. This refrigerant has a lower ozone depletion potential compared to the previously used R-12, making it a more environmentally friendly option.
The air conditioning system in the 2010 Avenger is charged with a specific amount of R-134a refrigerant, typically around 24-30 ounces (0.7-0.9 kg). It's important to use the correct refrigerant type and charge amount to ensure the system operates efficiently and safely.
Transitioning to New Refrigerants
In recent years, the automotive industry has been transitioning to newer, more environmentally friendly refrigerants, such as R-1234yf. This refrigerant has an even lower global warming potential than R-134a. However, the 2010 Dodge Avenger was not designed to use R-1234yf, and attempting to retrofit the system could be unsafe and illegal in many areas.
If the air conditioning system in a 2010 Dodge Avenger requires servicing, it's essential to use the recommended R-134a refrigerant and follow the manufacturer's guidelines for proper charging and maintenance.
Why is my Dodge Avenger not blowing hot air?
The most common reasons a Dodge Avenger heater isn't working are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor.
What Freon was used in 2010?
By January 1, 2010, there was a ban on the production and import of R-22. As a result, manufacturers of heat pump and air conditioning equipment redesigned their systems to accommodate R-410A, a chlorine-free refrigerant compared to R-22. The refrigerant would soon replace R-22 in the new HVAC equipment.
What type of freon does a 2010 Dodge Charger take?
R134a Freon: Vehicles Manufactured Between 1995 and 2021
The majority of vehicles on the road today use R134a to fuel their air conditioning systems.
What kind of Freon does a Dodge Avenger take?
Essential Dodge Avenger Refrigerants
R-134a PAG 46 AC Oil Lubricant: with ICE 32 Lubricant Enhancer features advanced chemistry to help extend compressor life and improve cooling capacity.
What type of refrigerant does Dodge use?
Dodge refrigerant filling quantities R134a an 1234yf.
Why is my AC blowing but not getting cold?
A dirty air filter can block airflow and reduce cooling to your home. In more extreme cases it can cause the system to shut down completely. If your thermostat checks out and you still don't have cool air, locate your system's air filter, turn the system off, remove the filter and inspect.
What are the most common problems with a 2010 Dodge Avenger?
Top 2010 Dodge Avenger Problems
- Engine May Not Start at Times.
- Automatic Transmission May Have Shifting Problems.
- Knocking Noise From the AC Compressor.
- Dodge issues recall on connector for cooling fan motor.
- Sensor Failure Inside Distributor May Cause Stalling/Starting Issues.
- Wet Carpet Due to Plugged Evaporator Drain.
What are the worst years for Dodge Avenger?
Some of the top Dodge Avenger problems include squealing brakes, a stalling engine, and the engine not starting. The 2008, 2012, and 2014 models had the most complaints from owners on RepairPal and CarComplaints.com.
Why is my Dodge Avenger AC not blowing cold?
The most common reasons a Dodge Avenger ac isn't working are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.
What vehicles use R-134a refrigerant?
In most cars that are on the road today, R134a refrigerant makes the A/C system blow cold on hot days. Selected for its low flammability and safety, as well as because it's kinder to the environment, almost every car built since 1994 is equipped with R134 refrigerant.
