What kind of transmission fluid does a 2000 Chevy s10 take?
The transmission fluid type for a 2000 Chevy S10 depends on whether the truck has the automatic 4L60-E or a manual gearbox. For the automatic 4L60-E, Dexron III-H automatic transmission fluid is standard; for a manual transmission, GL-4 gear oil (commonly 75W-90) is used. Always verify the exact specification for your build in the owner’s manual or with a GM dealer.
Identify your transmission
To determine which fluid applies, confirm the transmission model. The 2000 S10 could have either the automatic 4L60-E or a manual gearbox. Use the transmission code, VIN, or labeling to verify which one you have.
Automatic transmission fluid (4L60-E)
Fluid options and cautions for the automatic 4L60-E. Note that Dexron variants are not always interchangeable; follow GM guidance for your exact vehicle.
- Dexron III-H automatic transmission fluid (the traditional GM specification for the 4L60-E).
- Dexron VI automatic transmission fluid (newer specification that is backward compatible in many GM transmissions; use only if GM or a service bulletin approves it for your exact vehicle).
- Dexron II-D is older and generally not recommended for the 4L60-E, as Dexron III-H supersedes it.
Conclusion: For most 2000 S-10s with the 4L60-E, Dexron III-H is the standard fill. Dexron VI may be used only if your GM guidance confirms compatibility for your vehicle.
Manual transmission fluid
Manual S-10 transmissions require gear oil, not ATF. The usual recommendation is GL-4 gear oil, with viscosity such as 75W-90 or 80W-90 depending on the manual and climate. Do not use GL-5 oils in these older manuals unless the manual explicitly allows it.
- GL-4 75W-90 gear oil (commonly used in M5OD/M5R transmissions in these trucks).
- Confirm viscosity per the owner’s manual or GM service bulletin for your exact model.
Conclusion: If your S-10 has a manual transmission, use GL-4 gear oil in the recommended viscosity. It is not ATF.
How to confirm the correct fluid for your specific vehicle
Always verify with the official sources when in doubt. Use these steps to ensure accuracy:
- Check the owner’s manual or the transmission code on the label inside the glove box or near the transmission.
- Consult a GM dealer with your VIN to obtain the exact specification for your build year and transmission type.
- Follow GM service bulletins or official GM documentation if your vehicle has undated labeling or if you are performing a fluid change beyond standard intervals.
Conclusion: Correct identification of the transmission is essential to selecting the right fluid, and whenever possible rely on GM's official guidance for your VIN.
Summary
The 2000 Chevy S10’s fluid depends on the transmission: the automatic 4L60-E uses Dexron III-H ATF as standard, with Dexron VI as a potential alternative if approved by GM; manual transmissions require GL-4 gear oil (typical 75W-90). Verify with the owner’s manual or dealer to ensure you use the correct fluid for your specific build.
What kind of transmission fluid does a 1999 Chevy s10 take?
For a 1999 Chevy S10, the automatic transmission fluid type is Dexron VI, although the original specification was Dexron III. The manual transmission fluid depends on the specific transmission, but a common recommendation is a synchromesh fluid. Always check your owner's manual for the most accurate information.
This video demonstrates how to change the transmission fluid on a 1999 Chevy S10, including adding fluid with a pump: 1mJeray RacingYouTube · Nov 12, 2022
Automatic transmission (4L60-E)
- Fluid type: While the original specification was Dexron III, modern recommendations and manufacturer bulletins specify using Dexron VI automatic transmission fluid (ATF).
- Capacity: The total fill capacity is about 11.211.211.2 quarts, with an initial fill of approximately 555 quarts.
Manual transmission
- Fluid type: The correct fluid depends on the specific manual transmission. A common recommendation is a synchromesh fluid.
- Note: The type can vary, so it's important to check your owner's manual for the specific requirement. For a 4-cylinder engine, a 5W-30 synchromesh transmission fluid is sometimes recommended.
What kind of transmission fluid does a 2000 4L60E take?
For 4L60E and 4L80E transmissions we recommend that you use regular Dexron III ATF.
How much transmission fluid does a 2000 S10 take?
Automatic Transmission Fluid
Capacity: 4 speed 4L60-E Total Fill 11.2 quarts.
What kind of transmission fluid does a 2000 Chevy take?
Dexron-VI ATF
General Motors recommends Dexron-VI ATF transmission fluid for use in all Chevy Silverado 1500 automatic transmissions.
