What kind of transmission fluid does a 2000 Ford Ranger take?
The 2000 Ford Ranger takes Motorcraft MERCON V automatic transmission fluid. This is the recommended fluid for the Ranger's 4-speed automatic transmission.
Detailed Explanation
The 2000 Ford Ranger was equipped with a 4-speed automatic transmission, which requires a specific type of transmission fluid for proper operation and lubrication. According to Ford's recommendations, the correct fluid for the Ranger's transmission is Motorcraft MERCON V automatic transmission fluid.
MERCON V is a type of transmission fluid that meets Ford's stringent performance requirements for their 4-speed automatic transmissions. It is designed to provide excellent wear protection, smooth shifting, and long service life in Ford vehicles. Using the wrong type of fluid can lead to transmission problems, so it's important to follow the manufacturer's recommendations.
Capacity and Replacement
The 2000 Ford Ranger's 4-speed automatic transmission holds approximately 12 to 13 quarts of MERCON V fluid. Ford recommends changing the transmission fluid and filter every 30,000 miles or 24 months, whichever comes first, to maintain the transmission's performance and longevity.
When changing the fluid, it's important to use the exact type of MERCON V fluid specified by Ford. Mixing different types of transmission fluids can cause compatibility issues and lead to transmission damage. Consult your owner's manual or contact a Ford dealer for the specific fluid recommendations for your 2000 Ranger.
What transmission fluid for 2001 Ford Ranger?
Valvoline Mercon V ATF.
What transmission fluid goes in a 2000 Ford Ranger?
STP Dexron VI Automatic Transmission Fluid 1 Quart
Notes: Automatic transmission fluid.
Is MERCON the same as ATF?
Valvoline Mercon V ATF is the conventional automatic transmission fluid that has been uniquely engineered to extend the life of automatic transmissions in vehicles that specify all Mercon V and additional Mercon applications.
What transmission fluid is compatible with MERCON V?
MAG 1 MERCON® V ATF is also suitable for use where the following automatic transmission fluids are recommended DEXRON®-II (E, F), DEXRON®-III (G, H), Honda Z-1, MERCON® Nissan Matic-J or Toyota T-IV. Not for use in vehicles requiring Ford Type F fluid or Continuously Variable Transmissions (CVTs).
What type of ATF does Ford use?
MERCON® transmission fluids undergo extensive testing, both in the lab and in real-world conditions, to ensure they provide optimum performance and durability. MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
Can ATF 4 be used in Ford?
Mobil ATF+4 is not recommended for vehicles that require Ford Mercon® or General Motors Dexron® type fluids. Automatic transmissions should be checked for proper fluid levels at regular intervals, and the fluid should be changed at manufacturer-recommended intervals.
How many quarts of transmission fluid does a Ford Ranger hold?
7 3/4 + quarts.
How much transmission fluid does a 2000 Ford Ranger 3.0 take?
Automatic Transmission Fluid
3.9 quarts Initial Fill. Capacity: 4 speed RWD 4R44E Total Fill 10 quarts.
Is Mercon v the same as Mercon ATF?
Ford Technical Service Bulletin (TSB) 06-14-04 indicates that Mercon "V" is to replace the original Mercon fluid. This fluid was first used in the following transmissions: 1997 4R70W 4-speed automatic transmission. 1998 4R100 4-speed automatic transmission.
What type of ATF does a Ford Ranger take?
FRAM – Mercon V Automatic Transmission Fluid: 1 Quart (Part No. F450) FRAM Mercon® V ATF is for use in Ford vehicle transmissions and transaxles.
