What oil does a 2009 Toyota Sequoia 5.7 take?
The 2009 Toyota Sequoia 5.7L uses SAE 5W-30 engine oil, and you can choose either conventional or full synthetic oil as long as it meets Toyota’s specifications (API SN/SM and ILSAC GF-5). Always verify the exact requirement in your owner's manual for your VIN and climate.
Oil type and specifications
To ensure proper lubrication and warranty compliance, use an oil that matches these common specifications for the 5.7L V8 in the Sequoia. Regional guidance may vary, so consult the manual or a Toyota service representative if in doubt.
- Viscosity: SAE 5W-30 under normal driving conditions
- Standards: API service SN/SM or higher; ILSAC GF-5 (GF-4 acceptable if GF-5 is not available)
- Oil type: Conventional mineral oil or full synthetic oil that meets the above standards
- Brand flexibility: Any reputable brand that meets the API/SN-SM and GF-5 specifications is acceptable; Toyota Genuine Oil is not mandatory but is commonly used
In summary, use a 5W-30 oil that complies with API SN/SM and ILSAC GF-5, and you may choose conventional or synthetic based on your preferences and budget.
Choosing between conventional and synthetic and maintenance intervals
Before selecting an oil type or determining change intervals, consider how you drive and your climate. The following options reflect common approaches for this engine.
- Conventional 5W-30: Cost-effective option; suitable for typical driving; follow the maintenance schedule in the owner's manual
- Full synthetic 5W-30: Greater protection in extreme temperatures and under heavy load; often allows longer intervals between changes per the manual
- Synthetic blend 5W-30: A middle ground in cost and protection; ensure it meets the specified API/GF-5 standards
- Climate considerations: For very cold or very hot climates, always confirm that 5W-30 is appropriate for your conditions in the manual
Whichever option you choose, follow Toyota’s recommended maintenance intervals and use a reputable brand that meets the stated specifications.
Practical notes and verification
Owner’s manual and VIN-specific notes
Always double-check the exact oil specification for your vehicle’s year, trim, and regional manual, as recommendations can vary by market and production batch.
Summary
For a 2009 Toyota Sequoia with a 5.7L V8, the standard oil is SAE 5W-30, with the option to use conventional or full synthetic oil that meets API SN/SM and ILSAC GF-5. Verify the specification in your owner’s manual for your climate and driving conditions, and choose a reputable brand accordingly. Regularly follow the recommended maintenance intervals to keep the engine running smoothly.
How much oil does a 5.7 Toyota Sequoia take?
And 4.6 L V8 engines is 7.5 L or 7.9 quarts and the oil fill capacity for the older 2007 to 2009 5.7 L V8 engines is 7 L or 7.4 quarts to learn more about the correct oil specifications.
Can you use 5W-30 oil in Tundra 5.7 L engine?
You can use 5W-30 oil in a Tundra 5.7L, especially in older models or certain climates, but it is generally recommended to use the manufacturer's specified oil, which is often 0W-20 or 5W-20 for newer engines. While 5W-30 may work, it is thicker than the recommended 0W-20 at startup, which could potentially reduce fuel efficiency and flow, so it is best to use the viscosity listed in your owner's manual.
For newer Tundras (typically 2010 and later)
- Check your owner's manual: The recommended oil for most 5.7L engines is 0W-20 full synthetic.
- Consider 5W-20: If 0W-20 is unavailable, 5W-20 is the next best alternative for U.S. model regions.
- Why 0W-20 is preferred: Newer engines are designed for the lower viscosity of 0W-20, which provides better fuel economy and quicker lubrication on cold starts.
- Can you use 5W-30? While some people in forums report using 5W-30, especially with high-mileage engines or in hot climates, it is not the manufacturer's primary recommendation and may lead to decreased fuel efficiency.
For older Tundras (pre-2010)
- Check your manual: Older 5.7L engines, and particularly the 4.7L engine, may have recommended 5W-30 as the correct viscosity.
Important considerations
- Consult your owner's manual: Always refer to your owner's manual to find the specific viscosity recommended for your truck's model year.
- Use the correct specification: Ensure the oil you choose meets the necessary API service classification and other specifications listed by Toyota.
- Consider your driving conditions: If you consistently drive in very hot weather, some users on forums suggest a slightly thicker oil like 5W-30 might be considered, but this is not the manufacturer's standard recommendation.
What oil does a 2009 Toyota Tundra 5.7 take?
Oil Grade: API*
| Viscosity: | 5W-20, 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 7.4 quarts (with filter). After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
What is the best engine oil for a Toyota Sequoia?
Mobil 1 – High Mileage 0W-20 Full Synthetic Motor Oil, Extends Engine Life, 5 Quart (Part No. 15015)
