What oil does a 2013 Ford Expedition take?
In short, a 2013 Ford Expedition typically requires SAE 5W-20 engine oil (a synthetic blend or full synthetic is acceptable) and uses about 6 quarts of oil with a filter. In hot climates or when towing heavy loads, SAE 5W-30 can also be used. Always verify the exact specification in the owner's manual for your specific engine and configuration.
The 2013 Expedition lineup commonly centers on Ford's 5.4-liter V8 powerplant. Oil requirements are tied to that engine, so owners should consult the manual or a dealer for any variations based on market or trim. This article outlines the standard oil grade, capacity, and maintenance considerations to help ensure proper lubrication and engine longevity.
Recommended oil type and viscosity
The following guidelines apply to the common 5.4L V8 configuration in the 2013 Expedition and reflect typical Ford recommendations for normal driving conditions.
- Oil grade: SAE 5W-20 is the standard recommendation for normal driving.
- Alternate grade: SAE 5W-30 is acceptable in hot climates or when the vehicle is regularly used for heavy towing or work duty.
- Oil type:Synthetic blend is commonly used, though full synthetic is also suitable and may support longer drain intervals.
- Brand/certification: Use oils that meet Ford specification and API SN or newer (Ford-approved brand such as Motorcraft is recommended).
Using the correct viscosity helps maintain fuel efficiency and engine protection across temperature ranges. If you live in extreme conditions, follow the manual guidance and consult a dealer if you're unsure.
Oil capacity and change intervals
Understanding how much oil the Expedition holds and how often to change it is essential for maintenance planning. The figures below reflect the typical 5.4L V8 setup for the 2013 model year.
- Oil capacity (with filter): approximately 6 quarts
- Change interval: follow the owner's manual; with conventional oil, about every 5,000 miles (or 6 months); with synthetic oil, many owners extend to about 7,500 miles (or 12 months). Always check the exact schedule in your manual or from Ford's service literature.
- Oil filter: use an OEM Ford/Motorcraft filter or an equivalent compatible filter meeting Ford specs
Adhering to the recommended intervals helps ensure engine protection and performance. If towing regularly, driving in harsh conditions, or operating in extreme temperatures, more frequent changes may be prudent.
Additional considerations
Climate, towing, and engine wear
Because the Expedition is often used for heavy-duty applications, climate and towing weight can influence oil choice and service timing. In very hot environments or with frequent towing, you may prefer 5W-30 and more frequent checks of oil level and condition, while maintaining adherence to Ford's guidelines.
Summary
For most 2013 Ford Expeditions, the standard engine oil is SAE 5W-20, with a capacity of about 6 quarts (including the filter). 5W-30 is acceptable in hot climates or for heavy towing. Use Ford-approved oils (such as Motorcraft) that meet API SN or newer, and refer to the owner's manual for the exact oil change interval and any engine-specific notes. Regular monitoring and sticking to the official schedule help keep the Expedition performing at its best.
What kind of oil does a Ford Expedition take?
The 2022 Ford Expedition typically uses SAE 5W-30 oil that meets Ford spec WSS-M2C961-A1. For extreme cold climates (below -22∘Fnegative 22 raised to the composed with power cap F−22∘𝐹 or -30∘Cnegative 30 raised to the composed with power cap C−30∘𝐶), use SAE 0W-30 meeting spec WSS-M2C963-A1. The oil capacity is 6 quarts. Older models may use different specifications, such as SAE 5W-20 for the 2012 5.4L V8 engine.
Common oil types
- 5W-30: This is the standard recommended oil for most modern Expeditions, especially those with the 3.5L EcoBoost engine.
- 0W-30: Use this in very cold climates where temperatures are consistently below -22∘Fnegative 22 raised to the composed with power cap F−22∘𝐹 (-30∘Cnegative 30 raised to the composed with power cap C−30∘𝐶).
- 5W-20: Check your owner's manual, as some older models like the 2012 Expedition with a 5.4L V8 may specify this viscosity.
Important considerations
- Check your owner's manual: Always consult your owner's manual or the oil fill cap for the most accurate recommendation for your specific model and year.
- Meeting specifications: Ensure the oil meets the required Ford specifications (e.g., WSS-M2C961-A1).
- Oil capacity: Be prepared to add about 6 quarts of oil for a full change, but always check the dipstick to confirm the correct level.
How much oil does a 3.6 L V6 take?
A 3.6L V6 engine typically takes between 5.9 and 6 quarts of oil when changing the filter, but the exact amount depends on the vehicle. Always check your owner's manual for the specific capacity and recommended oil type for your car, as there can be variations between manufacturers and even model years.
How to determine the correct amount
- Check your owner's manual: This is the most reliable source for your specific vehicle's oil capacity.
- Look for the oil cap: The correct oil type and sometimes the capacity will be printed on the oil filler cap under the hood.
- Consider a slight variation: Some sources report a capacity of 5.9 quarts (about 5.6-5.9 liters) for some models, while others specify 6 quarts.
- Start with less and check: It is often recommended to start by adding about 5 quarts, running the engine briefly, and then checking the dipstick. Add the rest of the oil gradually until the level is correct, which helps prevent overfilling.
Can I use 5W-30 instead of 5W20 in my Ford Escape?
Oil viscosity is only really relevant when you're under manufacturer's warranty. After warranty you can use whatever you want. I have a 2017 which calls for 5W20, but I use 5W30.
What type of oil does a 2013 Ford Expedition take?
STP Full Synthetic Engine Oil 5W-20 5 Quart.
