What oil does a 6.2 Chevy take?
The recommended oil for a 6.2L Chevy engine is 5W-30 or 5W-20 synthetic motor oil. This oil weight provides the optimal balance of engine protection and fuel efficiency for this engine size and configuration.
Detailed Explanation
The 6.2L V8 engine is a popular option found in many Chevrolet and GMC trucks and SUVs, including the Silverado, Sierra, Tahoe, and Suburban models. This engine is known for its powerful performance and efficiency, but it requires the right type of motor oil to function at its best.
The key specifications for the oil recommended for a 6.2L Chevy engine are:
- Viscosity: 5W-30 or 5W-20 synthetic motor oil
- Quality: API-certified for gasoline engines
- Capacity: 6 quarts (with filter change)
The 5W-30 or 5W-20 viscosity provides the optimal balance of cold-weather fluidity and hot-weather thickness to ensure proper lubrication and engine protection across a wide range of operating temperatures. Synthetic oils are preferred as they offer superior performance and longer service life compared to conventional mineral-based oils.
It's important to use an API-certified oil that meets the manufacturer's specifications to ensure compatibility with the engine's components and to maintain the warranty. Chevy also recommends changing the oil and filter every 5,000 to 10,000 miles, depending on driving conditions.
What kind of oil does a 2016 Chevy Silverado 1500 6.2 take?
In general, the top Chevy Silverado 1500 oil type is SAE 0W-20 full synthetic motor oil from ACDelco's dexos1 standard for the 5.3L and 6.2L engines. For the smaller 2.7L TurboMax high-output engine, you'll need SAE 5W-30 full synthetic oil.
What happens if I put 5W-30 instead of 5W-20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine.
What is Dexos oil 5w30?
Dexos oil is made from synthetics or synthetic blends. The idea behind creating dexos oil was to provide exceptional motor cleaning, increased gas mileage, extended drain interval, and reduced sludge formation.
How much oil does a 6.2 Chevy engine take?
8 quarts (with filter). After refill check oil level. Notes: (1) This specification has been updated from Dexos 1 Gen 2 to GM Dexos 1 Gen 3.
What oil does a 6.2 LS3 take?
The recommended oil for those engines, according to General Motors, is 5W30 Mobil 1 Full Synthetic oil. These engines leave Indmar filled with 5W30 Mobil 1 and that is the oil that should be used in these engines at the normal 50 hour oil change intervals.
What oil does a 6.2 L Sierra take?
Oil Grade: SEOC3
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 8 quarts (with filter). After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) Replace drain plug seal. |
How much oil does a 6.2 LS take?
Capacities and Specifications - 6.2L
| Item | Capacity |
|---|---|
| Engine oil (with oil filter). | 7.0 qt (6.6 L) |
| Engine coolant. | 21.3 qt (20.2 L) |
| Brake fluid. | Between MIN and MAX on brake fluid reservoir |
| Front axle. | 2.7 qt (2.6 L) |
What kind of oil does a 6.2 L V8 Chevy take?
SAE 0W-20
Behind the wheel of Chevy's mighty 6.2-liter V8 engine? It will require SAE 0W-20 viscosity grade engine oil.
What oil is best for 6.2 l/ls?
However, the mighty 6.2-liter V-8 and 3.0-liter Turbo Diesel engines require SAE 0W-20 viscosity grade engine oil and SAE 0W-20 dexosD diesel engine oil. Using the right engine fluid isn't just about maintaining your warranty. It's also about ensuring your engine functions as efficiently as possible.
Can I use 5W30 instead of 0w20 Chevy?
**if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
