What oil does a Dodge Dart 2.0 take?
The Dodge Dart 2.0 generally requires SAE 5W-30 synthetic blend engine oil (MS-6395). Some model years or climates may call for SAE 5W-20; always verify in your owner's manual or on the under-hood label.
This article explains the oil options for the 2.0-liter engine used in the Dart, how to pick the right grade, and how to confirm the exact specification for your specific vehicle.
Engine oil standards and grades
The following options reflect typical grades you might encounter for the Dart’s 2.0-liter engine. The exact grade depends on the model year, regional climate, and the vehicle’s oil-fill cap or manufacturer sticker.
Common oil grades for the 2.0L Tigershark
- 5W-30 synthetic blend (MS-6395) — The most commonly recommended grade for many 2.0L Dart applications, offering good protection across a wide temperature range.
- 5W-20 or 0W-20 — Some model years or climates may specify a thinner oil to improve cold-start performance or fuel economy; check the manual for your exact vehicle.
Conclusion: Always confirm the exact grade specified for your car’s year and region, since the recommended oil can vary.
Manufacturer specifications and key notes
In addition to the viscosity, use an oil that meets Chrysler’s MS-6395 specification or the API SN/SN Plus rating as appropriate for your year. The dipstick and oil-fill cap on many Dodge Darts will indicate the correct grade, and your dealer can provide the precise requirement for your VIN.
Oil capacity and change considerations
Before listing capacity, note that the following reflects typical guidelines for the 2.0L Dart engine and can vary slightly by model year and filter choice.
- Oil capacity with filter change: approximately 5 quarts (about 4.7–5.0 L).
- Oil capacity without filter change: slightly less, often around 4.5–4.7 quarts, depending on the engine design and pan size.
Conclusion: After an oil change, fill to the full mark on the dipstick and recheck after a short idling period to ensure the level is correct.
How to verify the exact specification for your Dart
Because specifications can vary by year, trim, and production region, the safest approach is to validate the oil requirement for your vehicle using multiple sources:
- Consult the owner’s manual for the exact viscosity and specification (MS-6395 or API rating) required for your model year.
- Check the information label under the hood on the driver’s side, which often lists the recommended oil grade and capacity.
- When in doubt, contact a Dodge/Mopar dealer or a trusted mechanic with your VIN to confirm the precise specification.
Final note: Adhering to the correct oil grade and capacity helps ensure proper engine protection and performance for the Dart 2.0.
Summary
The Dodge Dart 2.0 typically uses 5W-30 synthetic blend oil (MS-6395), with 5W-20 options possible for certain years or climates. Expect about 5 quarts of oil during a standard change, and always verify the exact specification from the manual, under-hood label, or dealer to account for year-to-year differences. Proper confirmation ensures optimal lubrication and engine longevity.
How many quarts of oil does a 2013 Dodge Dart 2.0 take?
A 2013 Dodge Dart with a 2.0L engine takes 5 quarts of oil when replacing the filter. The recommended viscosity is 0W-20. Always check the dipstick after refilling to ensure the correct level.
- Oil capacity: 5 quarts (with filter)
- Recommended oil viscosity: 0W-20
- Important: After adding the new oil, run the engine for a short time, then check the dipstick and add more oil if needed to reach the full line.
How much oil does a 2.0 4 cylinder engine take?
Approximately 5.1 quarts
2.0L turbocharged engine: Approximately 5.1 quarts of oil.
What kind of oil does a Ford 2.0 take?
Example: The below image shows that a 2021 to 2024 2.0L EB Bronco Sport vehicle takes SAE 5W-30 Motorcraft oil, has a 5.5-quart capacity, and uses a Motorcraft FL910S oil filter.
What kind of oil does a Dodge Dart 2.0 take?
The recommended oil for a Dodge Dart with a 2.0L engine is 0W-20 full synthetic motor oil, with a capacity of approximately 5 quarts including the filter. Always check the oil cap for the specific type and confirm the capacity with your owner's manual.
- Oil Type: Use a 0W-20 full synthetic motor oil.
- Capacity: The engine requires about 5 quarts of oil, including the oil filter.
- Confirmation: It is best to double-check the owner's manual or the oil fill cap on your engine for the most accurate recommendation for your specific vehicle.
