What oil does a V6 Challenger take?
The Dodge Challenger with the V6 engine (the 3.6L Pentastar) typically uses 0W-20 synthetic motor oil.
This article explains the standard oil choice for the V6 Challenger, how its requirements are communicated by manufacturers, and what to check for your model year, climate, and maintenance plan.
Oil type and specifications for the 3.6L Pentastar V6 Challenger
To help you source the correct product, here are the core details you should verify before buying or changing the oil.
- Viscosity: 0W-20
- Oil type: Full synthetic motor oil
- Oil specification: Meets API SP (or newer) and ILSAC GF-6 performance standards
- Capacity: Approximately 5 quarts (4.7 liters) of oil, plus a new filter
Having the right viscosity, synthetic quality, and meeting the appropriate API/GF standards helps ensure optimal lubrication, fuel efficiency, and engine protection for daily driving and performance variants.
Notes and practical guidance
While 0W-20 synthetic is the standard recommendation for most 3.6L V6 Challengers, always confirm the exact specification for your model year and regional climate by consulting the owner's manual or checking with a Dodge/Chrysler dealer. Some conditions or updates to service guidelines may influence the preferred oil grade or capacity.
Summary
The V6 Challenger’s oil of record is 0W-20 synthetic oil, meeting API SP and ILSAC GF-6 standards, with an approximate capacity of 5 quarts including the filter. Always verify the precise requirements for your vehicle year and driving environment in the official manual or via a trusted dealer.
How much oil does a 3.6 Dodge Challenger V6 take?
6 Qts
Dodge Charger Challenger 3.6L 6 Qts.
What oil does a 3.6 L V6 2012 Challenger use?
Genuine Mopar Engine Oil Change Kit 2012 Dodge Challenger 3.6L engine oil 5w30.
What type of oil does a V6 Challenger take?
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
What oil does a Dodge 3.6 V6 take?
The recommended oil for a Dodge 3.6L engine is SAE 0W-20 full synthetic motor oil, though some sources state that SAE 5W-20 is also acceptable and that SAE 5W-30 can be used in hotter climates. The engine typically requires 6 quarts of oil.
Oil type and weight
- Primary recommendation: SAE 0W-20 full synthetic oil.
- Alternative options:
- SAE 5W-20 full synthetic is often listed as an acceptable alternative.
- SAE 5W-30 synthetic can be used, especially in hot climates, according to some sources.
Oil capacity
- The 3.6L V6 engine typically requires 6 quarts of oil.
Important notes
- Always check your vehicle's owner's manual for the most accurate and up-to-date information, as specifications can vary by model year and specific vehicle.
- The oil must meet the manufacturer's specifications, such as the Mopar API certification.
