What oil does an SSR take?
Most SSR four-stroke motorcycles and scooters use standard motorcycle engine oil, typically a 10W-40 viscosity, but the exact specification depends on your model, climate, and whether you’re using mineral or synthetic oil. Always verify with your owner's manual or the oil-cap label on your bike.
Understanding SSR engine oil needs
SSR bikes and scooters come in a range of sizes and configurations. The key factors to consider when choosing oil are viscosity (weight), whether the oil is mineral or synthetic, and whether it carries a wet-clutch rating such as JASO MA/MA2. Using the wrong oil can affect shifting, clutch performance, and engine protection.
Core oil classifications for SSRs
The following options cover what you’re likely to encounter on SSR models. Always confirm for your specific model before buying.
- 10W-40 mineral or synthetic motorcycle oil with a JASO MA/MA2 rating (compatible with wet clutches and common across many SSR engines).
- 10W-40 synthetic or synthetic-blend oil for improved high-temperature performance or extended drain intervals.
- 15W-40 or 20W-50 oils in very hot climates or on engines that see heavy use; some SSR owners opt for these in extreme heat, though they are less common as a default choice.
- Always prefer oils that meet the API specification (e.g., API SN) and the JASO MA/MA2 standard to protect the wet clutch.
In short, starting with a 10W-40 motorcycle oil is a common baseline, but you should tailor the choice to your model and environment.
Oil capacity and change intervals
Oil capacity and how often you change it depend on the engine size and riding conditions. Use the manual for exact figures, but the ranges below provide a useful guide for SSR four-stroke engines.
- Oil capacity typically ranges from roughly 0.6–0.8 liters for the smallest 50cc-class SSR models to about 1.0–1.5 liters for mid-size 125–150cc engines. Exact capacity can vary by model and whether a filter is included.
- Oil-change intervals commonly fall in the 1,000–2,000 miles (1,600–3,200 km) range, or every 6–12 months if you ride infrequently, with more frequent changes advised for aggressive riding, dusty conditions, or frequent short trips.
These ranges are meant to guide you; always confirm the precise capacity and interval from your SSR’s documentation or dealer.
How to check and change SSR oil
Following proper steps ensures you maintain engine protection and clutch performance. The procedure below outlines a typical oil-change process for SSR four-stroke machines with a drain plug and oil filter, but consult your manual for model-specific details.
- Warm up the engine briefly to loosen oil, then turn off and let it rest for a few minutes.
- Place the bike on a center stand or paddock stand and position a drain pan beneath the drain plug.
- Remove the drain bolt and allow the old oil to drain completely. If your model has an oil filter, remove and replace it per the manual.
- Install a new oil filter (if applicable) and reinstall the drain bolt with a new gasket/seal. Ensure the plug is tight but not over-torqued.
- Fill the engine with the recommended oil grade and quantity specified by your model’s manual, using a funnel to avoid spills.
- Start the engine and let it run for a minute, then check for leaks and recheck the oil level with the dipstick or sight glass as instructed in your manual.
- Dispose of the used oil properly at an approved recycling facility and note the date and mileage for your maintenance log.
If you’re unsure at any step, have a qualified technician perform the oil change to avoid damaging the engine or clutch.
Finding the exact SSR oil spec for your model
Model-specific checks
Because SSR produces multiple models with different engines and configurations, the exact oil spec can vary. Use these sources to confirm the correct oil for your ride:
- Owner’s manual for your specific SSR model and year.
- Label or sticker under the seat or on the side of the engine case that lists oil type and capacity.
- Official SSR Motorsports website or product sheets for your model.
- Authorized SSR dealer or service center for precise recommendations, especially for imported or discontinued variants.
Having the exact specification on hand helps prevent mismatches, especially when swapping brands or moving between mineral and synthetic oils.
Summary
For most SSR four-stroke motorcycles and scooters, 10W-40 motorcycle oil is a sensible default, and you should verify the exact grade, capacity, and change interval from your model’s manual or dealer. Choose oil that meets API and JASO MA/MA2 ratings to protect the wet clutch, and tailor your choice to climate and riding style. Regular oil changes, proper disposal of used oil, and keeping to the recommended service schedule will help ensure smooth shifting, reliable protection, and longer engine life.
What kind of oil does a 110 ssr dirt bike take?
All right so when do we do the first oil change after about two hours of riding right so you're going to want to warm up the bike for about 3 minutes um it has mineral oil in it as a a break-in oil
What oil to use for a 110 pit bike?
Silkolene 10W-40 Semi synthetic. Based in Cornwall, Red Circles Motorcycles is the largest importer and distributor of specialist Minibike parts in the UK. Suitable for all 4-Stroke engine sizes, 50cc, 70cc, 90cc, 110cc, 125cc, 140cc & 160cc.
What kind of oil does a SSR take?
And last you're going to want some oil i like to use 10W40. If you have a SSR I recommend using 10W40 non-synthetic. And make sure it's four stroke oil motorcycle.
How much oil does a 2006 Chevy SSR take?
2005-2006 Chevrolet SSR 6.0L V8. Notes: ENEOS Motor Oil 5W-30 (3703-400), 6 Gallon -- Application temperature: year-round; 6 Quart (qt) Capacity.
