What should my Honda Accord tire pressure be?
Most Honda Accord tires should be inflated to 32 psi (cold) for both front and rear tires. Check your specific model year and tire size on the door jamb placard or in the owner's manual to confirm.
The official tire pressure specification is printed on the tire placard located on the driver’s door jamb and also documented in the owner’s manual. Keeping the correct pressure is essential for safety, fuel efficiency, tire wear, and overall handling. The guide below walks you through where to find the exact number and how to check and adjust air accurately, with notes on seasonal changes and load considerations.
Where to find the official tire pressure for your Accord
The following steps help you locate the exact specification for your vehicle’s tires:
- Door jamb placard: Look on the driver’s-side door frame or the edge of the door for a sticker that lists the recommended cold tire pressures for front and rear tires, along with the standard tire size.
- Owner’s manual: If the placard is missing or unreadable, the manual provides the recommended pressures for cold tires and notes for different load conditions.
- Tire size and load considerations: If you have aftermarket wheels or a different tire size, the placard may show a different recommendation. Always match inflation to the size installed on your car.
- Spare tire or inflator kit: Some models include a temporary spare with its own pressure guideline; follow that spec if you routinely carry the spare or use a repair kit.
By consulting these sources, you ensure you’re inflating to the correct level for your exact Accord configuration.
How to check and adjust tire pressure correctly
Use these steps to accurately check and adjust your Accord’s tire pressure to the recommended level:
- Check tires when they are cold, ideally before driving or after sitting for at least three hours. Temperature gains from driving can skew readings.
- Use a reliable tire pressure gauge (digital or analog). Remove the valve cap and firmly press the gauge onto the valve stem to get a stable reading.
- Compare the reading to the recommended pressure on the door jamb placard or in the manual. If the pressure is too low, inflate in small increments until you reach the target. If it’s too high, release air slowly and recheck until you reach the target.
- Replace the valve cap securely and recheck all four tires. If you have a spare, check its pressure as well if it’s part of your routine.
- Regular maintenance: Check tire pressures monthly and before long trips, and adjust for seasonal temperature changes or listed load conditions.
Maintaining the correct tire pressure improves handling, braking performance, fuel economy, and tire longevity, while also reducing the risk of tire failure on the road.
Seasonal and load considerations
Cold weather can cause tire pressure to drop roughly 1 psi for every 10-degree Fahrenheit decrease in ambient temperature. In hot weather, pressures can rise. If you frequently drive with heavy loads or in extreme temperatures, recheck and adjust pressures accordingly and avoid exceeding the placard’s specified maximum.
What to do if you’ve changed tire size or trim
If you’ve installed different tires or rims than those originally equipped, always verify the correct cold inflation pressure for the new tire size with your dealer or the owner’s manual. The sticker on the door jamb reflects the original equipment and is your primary reference for safety and performance.
Summary
Key takeaway: The Honda Accord’s recommended tire pressure is typically 32 psi for both front and rear tires when cold, but always confirm with the door jamb placard and the owner’s manual for your exact year and tire size. Check pressures when the tires are cold, use a reliable gauge, and adjust as needed. Regular checks—especially with changing seasons and load—help maintain safety, fuel efficiency, and tire longevity.
