What size are the CV axle nuts on a 2006 Acura TSX?

The front CV axle nuts on a 2006 Acura TSX are 32 millimeters in diameter and are tightened with a 12-point 32 mm socket. This size is used for the outer joints on the front axles for this model year.

In more detail, the TSX’s front-wheel-drive setup uses a large nut at the outer end of each axle to secure the half-shaft to the wheel hub. The standard hardware for this generation from Honda/Acura is a 32 mm nut, typically requiring a 12-point socket for proper engagement. Always verify the exact specification for your vehicle using the service manual or a trusted parts diagram, since regional variations or aftermarket axles can alter the sizing.

Nut size and tool compatibility

The standard outer CV axle nuts on the 2006 TSX are 32 millimeters in diameter and are best accessed with a 12-point 32 mm socket. This ensures a proper fit and reduces the risk of rounding the nut. If you find space around the hub is tight, consider a short-reach or wobble extension along with a universal joint to help reach the nut without damaging nearby components.

Socket type and fit

Use a metric 12-point socket to avoid slipping or rounding the nut. Avoid using improvised tools that could slip or strip the nut, and ensure your tool is correctly sized to maintain good contact with the nut’s corners.

Maintenance notes and installation tips

Always torque the axle nut to the factory specification listed in the service manual for your exact vehicle. Use a calibrated torque wrench and ensure the joint is properly seated before torquing. If you’re replacing the axle or nut, consult the manual or dealer guidance for whether a new nut or any locking mechanism is required for your VIN, as requirements can vary by market or production run.

Summary

Bottom line: For a 2006 Acura TSX, the outer CV axle nuts are 32 mm in diameter and require a 12-point 32 mm socket. Always confirm the exact specification for your vehicle in the service manual and torque to the recommended value when reinstalling.

What size socket do I need for a cv axle nut?

The common CV axle socket sizes are 32mm and 36mm, but it can vary by vehicle and range from 27mm to 38mm. The best way to ensure you have the correct size is to check your vehicle's service manual or measure the nut, as the size is not universal. You may need a deep socket to fit over the length of the axle shaft. 
Common sizes

• 32mm: A very common size, especially on front-wheel-drive vehicles. 
• 36mm: Another frequently used size. 
• Other common sizes: Depending on the make and model, you may also need a 30mm, 34mm, or 35mm socket. 

How to find the correct size

• Check your service manual: This will provide the exact specification for your vehicle.
• Measure the nut: If you don't have the manual, you can use a caliper to get a precise measurement. 
• Look at the new axle nut: If you are replacing the axle, the new nut may be labeled with the size, or you can take the old nut to an auto parts store to match it. 
• Borrow a set: Many auto parts stores offer a free tool rental program where you can borrow a socket set to use while you work. 

Additional considerations

• Use a deep socket: Axle nuts are located at the end of a long shaft, so a deep socket is often necessary to fit properly. 
• Consider a 12-point socket: Some axle nuts require a 12-point socket, particularly on European and Japanese cars, so it's best to have a set that includes them. 
• Use a breaker bar: Axle nuts are often torqued on very tightly, so you may need a long breaker bar for extra leverage to loosen it. 

What size is a cv axle nut?

A CV axle nut is most commonly 32mm or 36mm, but the exact size varies depending on the vehicle's make, model, and year. It is best to measure the nut with calipers or to consult your car's service manual to confirm the specific size needed.
 
Common CV axle nut sizes

• 32mm: A very common size, especially for some import vehicles. 
• 36mm: Another very common size, particularly for American domestic vehicles. 
• Other possible sizes: Sizes like 30mm and 34mm can also be found. 
• Thread size: The thread size is also important, with common examples being M22x1.5 and M24x2. 

How to find the correct size

• Measure it: The most accurate method is to use calipers to measure the nut directly. 
• Check the service manual: The vehicle's specific service manual will provide the correct socket size and torque specifications. 
• Check online forums and parts websites: You can search online for your specific vehicle's make, model, and year to see what others have used. 
• Buy a set: If you are unsure, it may be helpful to purchase a set that includes common metric socket sizes like 30mm, 32mm, 34mm, and 36mm. 

What size is the axle nut on a 2006 Acura TSX?

Axle Nut for 2004-2008 ACURA TSX FRONT | M24 X 1.5 Qty 2.

What size is the axle nut on an Acura?

Notes: Axle Nut -- M24 x 1.5mm. Axle Nut Socket Size: M24 mm.