What size are the CV axle nuts on a 2016 Toyota Camry?
The CV axle nuts on a 2016 Toyota Camry are typically a 30 mm hex size, though some AWD or certain engine configurations may use a 32 mm size. Always verify with the official service information for your exact VIN or measure the nut directly if you have access to it.
Common sizes and variations
Size can vary depending on the Camry’s drivetrain and trim. The two sizes you’re most likely to encounter on this generation are listed below.
- 30 mm hex (the most commonly reported size for many 2012–2017 Camry front axles)
- 32 mm hex (appears on some AWD or specific engine configurations)
These options cover the typical scenarios you’ll encounter on a 2016 Camry. If your vehicle has a different configuration, verify against the service manual or VIN-specific parts data.
How to confirm the correct size for your car
Before proceeding with any work, confirm the exact nut size to avoid damaging the nut or the socket. Here are practical steps to verify:
- Inspect the nut on the axle directly and measure across the flats with a caliper or standard socket to identify the best-fitting size (start with 30 mm, then check 32 mm if needed).
- Consult the official Toyota service information for your VIN or your vehicle’s maintenance manual, which lists the precise CV axle nut size for your drivetrain.
- If you’re replacing the axle nut, use a new OEM-spec nut and torque it to the manufacturer’s specification for your engine/drivetrain. If you don’t have the torque spec handy, consult the service data or a dealership to avoid under- or over-torquing.
Correct verification helps ensure a proper fit and secure attachment of the CV axle to the hub, preventing leaks, looseness, or bearing damage.
Summary
For most 2016 Toyota Camry models, expect a 30 mm CV axle nut, with 32 mm appearing on some AWD or particular engine configurations. Because sizes can vary by drivetrain and VIN, the safest approach is to check the service manual for your exact vehicle or measure the nut directly and test-fit sockets. When in doubt, replace with a new OEM nut and torque to the specified value from Toyota’s service data.
What size nut is on a CV axle?
Depends on the cv axle being oe or not. 36mm typically.
What size is the Toyota Camry axle nut?
Notes: Axle Nut -- M22 x 1.5, 12-Point Hex Star Pattern Nut.
What size socket fits a Toyota axle nut?
39mm
39650 39mm 12 pt Axle Nut Socket for Toyota.
What size is the axle nut on a 2016 Toyota Corolla?
M22 x 1.5 mm
Notes: Front, Axle Nut. M22 x 1.5 mm.
