What size are the lug nuts on a 2014 Ford Focus?
The lug nuts used on a 2014 Ford Focus are M14 x 1.5 with a 21 mm hex head.
These fasteners typically use a conical (60-degree) seat and are applied to 5-lug wheels on the Focus. Market variations and aftermarket wheels can alter the exact size, so it's best to verify against your owner's manual or the fasteners that came with your wheels. The designation covers the thread size (M14), the pitch (1.5), and the wrench size (21 mm), not the wheel diameter.
Key lug nut specifications you should know
Here are the core specifications you’re likely to encounter when replacing lug nuts on this model:
- Thread size and pitch: M14 x 1.5
- Seat type: Conical (60-degree) seat
- Nut tightening size: 21 mm across flats
- Torque specification: Typically around 100 ft-lb (135 N·m)
Using the correct thread size and torque preserves wheel integrity and prevents nut loosening.
Installation and verification tips
To verify the correct fasteners for your setup, follow these steps:
- Check the owner’s manual or the wheel/tires supplement for the recommended lug nut size and torque.
- Inspect the lug nuts that came with your current wheels or note the part numbers on replacement nuts.
- If unsure, measure the lug nut or stud: thread size should be M14 x 1.5; the hex head is typically 21 mm.
- Consult a dealer or tire/wheel professional if you’re installing aftermarket wheels or notice improper fitment.
Ensuring the nuts are the correct size and torqued properly is essential for safe wheel mounting and tire performance.
Additional considerations
Some aftermarket wheels or regional market variants may use different lug nut sizes or seat types. If you’re buying replacement lug nuts for aftermarket wheels, always verify the exact requirement from the wheel manufacturer and the vehicle documentation. The 2014 Focus is a 5-lug setup, but verify hub bore and PCD compatibility if you switch wheels.
Summary
Bottom line: For a 2014 Ford Focus, expect M14 x 1.5 lug nuts with a 21 mm hex, a 60-degree conical seat, and a tightening torque around 100 ft-lb. Always confirm with your specific vehicle’s manual or hardware, especially when using aftermarket wheels, to ensure safe and proper installation.
What size lug nut for 2014 Ford Focus?
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, OEM Style, 0.553" Length, Chrome, 4 Pack (Part No. 711-832)
What size socket are Ford lug nuts?
The most common socket size for Ford lug nuts is 13/16" or 21mm, especially for models like the F-150 and Bronco. However, sizes can vary by model year and specific vehicle, with some models like the Bronco Sport using a 19mm (or 3/4") socket. It is best to confirm the exact size for your vehicle, as some older or different models might use a different size.
- 13/16" or 21mm: This is the most common size for many modern Ford vehicles, including the F-150 and Bronco. Some sources suggest 13/16" may be a slightly tighter fit than 21mm, which can help prevent rounding the lug nuts.
- 19mm (or 3/4"): This size is used on certain models, such as the Bronco Sport.
- Verification: It's important to check your vehicle's manual or confirm the size before buying tools, especially since some models use a different size or have swollen lug nuts that may require a special socket.
- Swollen lug nuts: If you have a Ford with swollen lug nuts, a standard socket may not fit. In these cases, a special "flip" socket, which has a slightly larger size, can be used to remove them.
What size socket for Ford Focus lug nuts?
The correct wheel nut socket size for a Ford Focus is 19mm. The lug nuts are also specified as having an M12x1.5 thread size. For best results, use a deep, 12-point, and quality-made socket to avoid damaging the nuts, especially if they are rounded.
- Socket size: 19mm
- Thread size: M12x1.5
- Recommendation: Use a quality 19mm socket that fully fits the nut to prevent rounding. Avoid adjustable or shallow sockets.
What size socket is a 2014 Ford Fusion lug nut?
The lug nut socket size for a 2014 Ford Fusion is a 19mm socket. The lug nuts use a metric M12x1.5 thread size.
- Socket size: 19mm
- Thread size: M12x1.5
