What size are the lug nuts on a 2015 Honda CRV?
The lug nuts are M12 x 1.5 with a 60-degree conical seat, tightened with a 19 mm (3/4-inch) hex socket, and typically torqued to about 80 ft-lbs (108 Nm).
Understanding the spec details
Beyond the quick answer, it helps to know how these measurements fit into the CR-V’s wheel system. The 2015 CR-V uses a five-lug wheel arrangement with a bolt pattern of 5x114.3 mm, meaning five lug nuts secure each wheel to a hub with that spacing. The thread size, M12 x 1.5, is a common standard for many Honda models of that era, and the 60-degree conical seat is designed to mate with the corresponding wheel holes and studs.
What this means for maintenance and replacements
For routine tire changes or rotations, use a quality 19 mm lug wrench or socket to fit the lug nuts. Always torque to the manufacturer's specification (80 ft-lbs / 108 Nm) in a crisscross or star pattern to ensure even distribution and proper seating. If you install aftermarket wheels, verify that the nut size, seat type, and thread pitch match the new rims; incorrect specs can compromise safety and wheel alignment.
Additional context and caveats
Some CR-V trims or aftermarket setups may introduce locking lug nuts or slightly different hardware. If your vehicle has locking nuts, you’ll need the specific key to remove them. Always consult the owner's manual or a Honda service bulletin for any model-year nuances, and consider rechecking lug torque after the first 50–100 miles of driving after installation.
Summary
For a 2015 Honda CR-V, expect lug nuts sized M12 x 1.5 with a 60-degree conical seat, a 19 mm hex socket for installation/removal, a 5x114.3 mm bolt pattern, and a recommended torque of 80 ft-lbs (108 Nm). Always verify compatibility with your specific wheels and follow the star-pattern torque sequence to maintain safety and wheel integrity.
