What size are the lug nuts on a 2016 Dodge Journey?
For most 2016 Dodge Journey models with factory wheels, the lug nuts use M12 x 1.5 thread size, a 60-degree conical seat, and typically require a 21 mm wrench. Exact hardware can vary with aftermarket wheels or different trims, so it’s wise to confirm for your specific setup.
Typical factory specification
Understanding the standard hardware helps identify what you should look for when servicing wheels on the 2016 Journey.
Common configuration
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (tapered) seat
- Hex head size: typically around 21 mm
- Bolt pattern: 5-lug, 110 mm (5x110)
Note that variations can occur with aftermarket wheels or non-OEM options. Always verify with a reliable source for your exact vehicle and wheel setup.
How to confirm the correct lug nuts for your car
To ensure you have the right hardware for your specific Journey, use these checks and steps.
- Inspect the current lug nuts on your wheels for any stamping indicating thread size or seat type.
- Consult the owner's manual or a dealership to confirm the factory lug nut spec for your trim and wheel option.
- Check the wheel or tire retailer’s specification if you’re using aftermarket or OEM wheels, as specs can vary.
- Ensure you know your vehicle’s bolt pattern (5x110 for the Journey) when selecting replacement hardware.
- Always use the correct torque specification and seating method for the lug nuts and wheels.
Verifying the exact lug nuts for your vehicle protects wheel mounting and safety during normal driving and servicing.
Special cases: aftermarket wheels and confirmations
Aftermarket wheels may use different lug nut sizes, seat types, or torque requirements. When upgrading or changing wheels, cross-check with the wheel manufacturer and your vehicle’s service documentation.
- Some aftermarket wheels may require different thread sizes or seat geometries (for example, alternate conical angles or mag seats).
- Always match lug nuts to both the wheel and the vehicle’s hub specifications, then confirm torque and seating with the manufacturer or dealer.
When in doubt, contact the dealer, refer to the vehicle’s manual, or check the wheel manufacturer’s compatibility chart to avoid incorrect hardware.
Summary
The 2016 Dodge Journey commonly uses M12 x 1.5 lug nuts with a 60-degree conical seat and a 21 mm hex size, on a 5-lug, 110 mm bolt pattern. However, wheel options and aftermarket setups can vary, so always verify the exact specifications for your wheels and follow the manufacturer’s torque guidelines. For the safest result, consult the owner’s manual or a dealership if you’re unsure.
What size lug nuts are on a 2016 Dodge Journey?
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome (sold by each) (Part No. 611-182)
What size socket for Dodge lug nuts?
The socket sizes of Dodge Challenger lug nuts are 13/16″. In other words, you would need a 22mm hex socket to fit.
What size socket is a 2014 Dodge Journey lug nut?
The 2014 Dodge Journey uses a 21mm or 13/16 inch socket size for its lug nuts. Both sizes will work, as 21mm is very close to 13/16 inch.
- Size: 21mm or 13/16 inch
- Why both work: The two sizes are nearly identical; 13/16 of an inch is approximately 20.6520.6520.65 mm.
- Which to use: A 21mm socket may fit more snugly than a 13/16 inch socket, or vice versa depending on the manufacturing tolerances of the lug nut and socket.
- Socket drive size: A 1/2-inch drive socket is generally recommended for lug nuts to handle the necessary torque.
What size are the lug nuts on a 2016 Dodge?
Notes: Nut. 14 mm x 1.50 thread size, 3/4" hex, 14 mm height.
