What size are the lug nuts on a 2017 Ford Ranger?
The lug nuts on a 2017 Ford Ranger typically measure 14mm in size. This is the standard lug nut size for this model year of the Ford Ranger pickup truck.
Detailed Information on 2017 Ford Ranger Lug Nuts
The 2017 Ford Ranger is a midsize pickup truck that was reintroduced to the North American market after an 8-year hiatus. As with any vehicle, the lug nuts that secure the wheels are an important component that must be properly maintained.
The 2017 Ford Ranger comes equipped with 14mm lug nuts. This is a common size for many pickup trucks and SUVs. The lug nuts are responsible for tightly securing the wheels to the vehicle's hubs, ensuring a safe and secure ride.
Why Lug Nut Size Matters
Knowing the correct lug nut size for your vehicle is important for a few key reasons:
- Wheel Maintenance: When changing a tire or performing wheel rotations, it's crucial to use the proper size lug nuts to ensure a tight and secure fit. Using the wrong size can lead to wheel separation, which is extremely dangerous.
- Replacement Parts: If you need to replace your lug nuts, you'll want to purchase the correct 14mm size for your 2017 Ford Ranger to ensure a proper fit.
- Towing and Hauling: If you plan to tow a trailer or haul heavy loads with your Ranger, properly torqued lug nuts are essential for maintaining wheel integrity and safety.
Paying attention to your 2017 Ford Ranger's lug nut size and properly maintaining them is an important part of vehicle ownership and safe driving.
What size socket takes off lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size impact wrench do I need to remove lug nuts?
This ensures you have plenty of power to break them loose. For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
What size are the wheel bolts on a Ford Ranger?
Current Ford Ranger Lug Pattern
From 2019 onwards, the Ford Ranger has used a standardized lug pattern of 6×139.7 mm (6×5.5 inches), with 6 factory studs in a circle with a 5.5-inch diameter.
Are Ford lug nuts metric or standard?
Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size are the lock nuts on a Ford Ranger?
Ford Ranger steel wheel/lug nuts, M12x1. 5mm chrome (set of 24)
What size socket do I need to remove an axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What size are the lug nuts on a Ford Ranger?
Thread size: M12-1.50. Verify lug nut to wheel mating surface for proper and safe fitment.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What size socket are Ford lug nuts?
To remove and install Ford F150 lug nuts, you'll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.
