What size are the lug nuts on a 2017 Honda Pilot?
When it comes to maintaining your 2017 Honda Pilot, knowing the correct lug nut size is essential for tasks like tire rotations, replacements, or any wheel-related maintenance. Using the wrong size can lead to improper torque, which may compromise safety. In this article, we’ll provide you with the exact lug nut size for the 2017 Honda Pilot and offer some tips for handling lug nuts safely and effectively.
Lug Nut Size for the 2017 Honda Pilot
The lug nuts on a 2017 Honda Pilot are typically 19mm in size. This measurement refers to the size of the socket or wrench needed to remove or tighten the lug nuts. Additionally, the thread size for the lug nuts is M14 x 1.5, which indicates the diameter and thread pitch of the lug nut.
Why Knowing the Correct Lug Nut Size Matters
Using the correct lug nut size is crucial for several reasons:
- Safety: Properly torqued lug nuts ensure that the wheels stay securely attached to the vehicle.
- Preventing Damage: Using the wrong size tool can strip the lug nuts or damage the wheel studs.
- Efficiency: Having the right tools on hand makes tire maintenance quicker and easier.
By understanding the correct lug nut size, you can avoid potential issues and ensure your vehicle remains safe to drive.
Tips for Handling Lug Nuts
Here are some tips to keep in mind when working with lug nuts on your 2017 Honda Pilot:
- Use a Torque Wrench: Always tighten lug nuts to the manufacturer’s recommended torque specification, which for the 2017 Honda Pilot is typically around 94 lb-ft.
- Inspect Lug Nuts Regularly: Check for signs of wear, rust, or damage, and replace them if necessary.
- Apply Anti-Seize Compound: A small amount of anti-seize compound can prevent lug nuts from becoming stuck, especially in areas with harsh weather conditions.
- Cross-Tighten: When tightening lug nuts, use a star pattern to ensure even pressure on the wheel.
Following these tips will help you maintain your vehicle’s wheels and ensure a safe driving experience.
Conclusion
For the 2017 Honda Pilot, the lug nut size is 19mm with a thread size of M14 x 1.5. Ensuring you use the correct size and follow proper maintenance practices will keep your wheels secure and your vehicle safe on the road. If you have any doubts or need assistance, don’t hesitate to reach out to a trusted auto repair professional.
Frequently Asked Questions
What size is a wheel nut socket?
Sizes: 18.5, 19.5mm single Hex (6pt) x 1/2"D x 78mm long. Thin walled sockets with protective sleeve to prevent damage to alloy wheels.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What size are the lug nuts on a Honda Pilot?
M14x1. 5 Open End Bulge Acorn Locking Lug Nuts (3/4" and 13/16" Hex)
What size socket takes off lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size are the wheel nuts on a 2017 Honda Pilot?
Dorman – Wheel Lug Nut: M14-1.50 Thread, Ball, Acorn, 1.122" Length, Chrome (Sold by each) (Part No. 611-327)
What size are the lug nuts on a 2017 Honda Fit?
M12x1. 5 Bulge Acorn Wheel Lug Nut (3/4" Hex - Conical Seat)
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size lug nuts are on a Honda SUV?
The lug nuts on most Honda CR-V models from 1997-2025 are 12×1.5 mm with a torque spec of 80 ft-lbs. This means you'll need a 19mm socket to remove or install the lug nuts.
What size impact wrench do I need to remove lug nuts?
This ensures you have plenty of power to break them loose. For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
What size socket for Honda lug nuts?
To properly remove and install Honda lug nuts, you'll need a socket that matches the nut size. The most common Honda wheel socket sizes are: 19mm – Fits 12×1.5 lug nuts. 22mm – Fits 14×1.5 lug nuts.
