What size are the lug nuts on a 2018 Honda CR-V?
The lug nuts on a 2018 Honda CR-V typically measure 12mm in diameter. This is the standard size for the wheels on this popular compact SUV model.
Detailed Information on 2018 Honda CR-V Lug Nuts
The 2018 Honda CR-V is equipped with 17-inch alloy wheels as standard. The lug nuts that secure these wheels to the vehicle's hubs have a diameter of 12 millimeters (mm). This is a common size for many Honda and other Japanese vehicle models.
Knowing the correct lug nut size is important for a few key reasons:
- It ensures you purchase the right replacement lug nuts if any need to be changed.
- It allows you to properly tighten the lug nuts to the recommended torque specification during a wheel change or tire rotation.
- Using the wrong size lug nuts can damage the wheel's lug holes and make it unsafe to drive.
In addition to the 12mm lug nuts, the 2018 Honda CR-V also uses the following wheel and tire specifications:
- Wheel size: 17 x 7J
- Tire size: 225/65R17
It's always a good idea to consult your owner's manual or contact a Honda dealer if you have any questions about the proper wheel, tire, or lug nut specifications for your 2018 CR-V.
What size socket is my lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket takes off lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is a Honda CRV lug nut?
3/4 Hex.
What size are Honda lug nuts?
The most common Honda wheel nut sizes are: 12×1.5 – Used on many Honda sedan models like Accord, Civic. The nut measures 12mm diameter with a 1.5mm thread pitch. 14×1.5 – Used on models like Honda Odyssey.
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size are the nuts on a Honda CRV?
Thread Size: M12-1.5.
What size are the lug nuts on a 2018 Honda CRV?
12 mm x 1.50 thread size, 3/4" hex. Refer to your owner's manual or wheel manufacturer's guide for correct thread size, seat style, length, hex and torque specifications.
What type of lug nuts are on Honda CRV?
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.22″ Length, Chrome (Sold by each)
What size socket is a 2018 Honda Fit lug nut?
To properly loosen or tighten Honda Fit lug nuts, you'll need a 19mm socket. This socket size matches the hexagonal shape of the lug nut, allowing for a secure grip and preventing damage to the lug nut or wheel stud.
