What size are the lug nuts on a Toyota Camry?
Most Toyota Camry models use lug nuts that fit a 12 mm diameter stud with a 1.5 mm thread pitch and require a 21 mm wrench to tighten or remove. Variations exist across different model years and wheel packages, so it’s important to verify for your specific vehicle.
The information below explains the typical specifications, how to measure what you need, and practical steps to confirm the exact lug nut size for your Camry — including guidance for aftermarket wheels and locking lug nuts.
Common specs you’ll encounter
The following points cover the core details you’ll typically encounter when identifying Camry lug nuts. Refer to your owner’s manual or the wheel kit packaging for your exact vehicle.
- Thread size and pitch: M12 x 1.5 (12 mm diameter with 1.5 mm pitch)
- Hex size (across flats): typically 21 mm
- Seat style: conical (tapered) seat to match most factory wheels
- Nut type: standard lug nuts, with some wheels using locking lug nuts that require a key
- Material/finish: usually steel with a chrome or black oxide finish; after-market replacements may vary
Knowing these specs helps you shop for correct replacements, ensure proper wheel fitment, and perform tire changes safely.
How to confirm the exact size for your Camry
Because lug nut size can differ by year, trim level, and wheel package, use these steps to verify the correct lug nuts for your car.
- Check the owner's manual or the service manual for the lug nut specification specific to your model year
- Inspect the door jamb sticker or fuel-filler cap label, which can list wheel and lug nut information
- Measure the hex across flats on one of your current lug nuts with a caliper or a ruler to determine whether you need 19 mm, 21 mm, or another size
- Compare with the socket you already use; if you’re unsure, try a few sizes carefully or consult a parts store with your VIN
- If you have aftermarket wheels or a locking lug set, confirm that the lug nuts match the wheel’s seat type and the key pattern, and keep the key in a safe place
When in doubt, contact a Toyota dealer or an authorized service provider who can look up your VIN and confirm the exact lug nut size and torque specification for your Camry.
Summary
For the vast majority of Camry models in recent years, lug nuts are M12 x 1.5 with a 21 mm hex across flats and a conical seating design. However, year-by-year variations do occur, especially with different wheel packages or aftermarket wheels. Always verify using official documentation or a VIN-specific parts lookup, and use the correct torque when reinstalling to ensure safe, reliable operation.
What size socket is a 2015 Toyota Camry lug nut?
The 2015 Toyota Camry uses a 21mm socket for its lug nuts. This is equivalent to a 13/16-inch socket, though a 21mm is the precise metric size.
- Metric: 21mm
- Standard: 13/16-inch
- Thread Size: M12 x 1.5
What size are the lug nuts on a 2010 Toyota Camry?
The 2010 Toyota Camry lug nut size is M12 x 1.5 for the thread size, with a hex size of either 13/16 inches or 21mm. The seat style is conical, and the lug nuts are typically made of steel with a chrome finish.
- Thread size: M12 x 1.5
- Hex size: 13/16" or 21mm
- Seat style: Conical
What size is a Toyota Camry lug nut?
M12x1. 5 Lug Nuts, Compatible with Toyota Camry Corolla Tacoma Highlander 4Runner Lexus Scion - 20PC 13/16" Hex, 1.46" Tall, 1.1" Wide - 12x1. 5 OEM/Factory Black Wheel Lug Nuts Closed End Mag Seat.
What size socket for 2012 Camry lug nuts?
The 2012 Toyota Camry uses a 13/16 inch or 21mm lug nut socket. Both are commonly listed, as 13/16 inch is equivalent to approximately 20.65mm, and a 21mm socket often provides a better fit for the factory lug nuts.
- Primary size: A 21mm socket will fit the lug nuts perfectly.
- Alternative: A 13/16 inch socket is also the correct size and is often listed in parts catalogs.
- Important note: The lug nuts are metric with a thread size of M12 x 1.5.
