What size bed is on a 1996 T100?
Two bed lengths were available for the 1996 Toyota T100: a 6-foot short bed and a longer bed around 7.5 feet, depending on cab configuration and the market. The exact size on a given truck varies by trim and region.
The 1996 T100 was offered with different cab styles (such as Access Cab and Xtracab) and market-spec options. In practical terms, most US-spec trucks came with either a 72-inch short bed or a longer bed measuring about 90 inches from wheel well to tailgate, with exact figures potentially differing by production run and specification sheet. To confirm the precise bed length on a specific vehicle, check the door jamb sticker or the VIN/build sheet references.
Bed length options for the 1996 T100
The following bed lengths were commonly offered, depending on cab configuration and market.
- Short bed: 6 feet (72 inches).
- Long bed: approximately 7.5 feet (about 90 inches).
Exact measurements can vary by market and trim level; always verify the specific truck’s bed length on its documentation or by direct measurement.
How to confirm the bed length on your truck
To verify the exact bed size on a particular 1996 T100, use these checks:
- Inspect the driver’s door jamb sticker for bed length specifications or a model code that indicates bed size.
- Check the original window sticker or the vehicle’s build sheet, which often lists bed length alongside other specs.
- Measure the bed length yourself by taking an inside measurement from the front edge of the tailgate to the inner face of the cab with the tailgate closed.
- Decode the VIN through a trusted decoder or consult Toyota’s historical build data to cross-reference bed length with trim and market.
Using these methods will confirm the exact bed length for your specific 1996 T100, recognizing that there were two common lengths and occasional variation by market.
Summary
For the 1996 Toyota T100, the bed length typically came in two main options: a 6-foot short bed and a longer bed around 7.5 feet. The exact size depends on cab configuration and market, so verifying via the door sticker, build sheet, or VIN is the reliable way to confirm your truck’s bed length.
