What size engine is in the 1962 Ford Falcon?
The 1962 Ford Falcon was equipped with a 170 cubic inch (2.8 liter) inline six-cylinder engine as its standard powerplant. This engine provided adequate power and fuel efficiency for the compact Falcon, which was designed as an economical and practical family car.
Engine Specifications of the 1962 Ford Falcon
The standard engine in the 1962 Ford Falcon was a 170 cubic inch (2.8 liter) inline six-cylinder. This engine produced 101 horsepower and 154 lb-ft of torque. It was paired with a standard three-speed manual transmission, though a two-speed Ford-O-Matic automatic transmission was available as an option.
The 170 cubic inch six-cylinder was the base engine, but Ford also offered several optional engines for the Falcon in 1962. These included a 144 cubic inch (2.4 liter) inline six, as well as a 260 cubic inch (4.3 liter) V8 engine. The V8 option produced 164 horsepower, providing more power for drivers who wanted a sportier performance.
Why the 170 Cubic Inch Six-Cylinder Was a Good Fit
- The 170 cubic inch six-cylinder engine provided a good balance of power and fuel efficiency, which aligned with the Falcon's design as an economical compact car.
- The engine was compact and lightweight, helping to keep the Falcon's overall weight down and improving handling and maneuverability.
- The inline six-cylinder configuration was a proven and reliable design that Ford had used in many of its vehicles over the years.
- The 170 cubic inch displacement provided adequate power for most driving needs, while still delivering reasonable gas mileage, an important consideration for many Falcon buyers at the time.
Overall, the 170 cubic inch six-cylinder engine was a well-suited powerplant for the 1962 Ford Falcon, providing a good mix of performance, efficiency, and reliability that matched the car's intended purpose as an affordable and practical family transportation.
Is a Ford Falcon rare?
Ford made eight different models of the Ford Falcon in 1963 (not counting Mercury's sibling Comet) for a total production of 328,339 units. For the purposes of building a hot rod, however, the model that carries the highest value by far is the Ford Falcon Futura Sprint hardtop coupe, of which only 10,479 were built.
How much is a 1964 Ford Falcon worth?
Typically, you can expect to pay around $11,483 for a 1964 Ford Falcon in good condition with average spec.
What year is the most valuable Ford Falcon?
1971
Topping the list – not surprisingly – is the 1971 Falcon GTHO Phase III, a car revered as the world's fastest four-door sedan in its day and one that went on to dominate Bathurst and other racetracks around the country.
What engine is in a 1962 Ford Falcon?
First generation (1960–1963)
| First generation | |
|---|---|
| Powertrain | |
| Engine | 144 cu in (2.4 L) Mileage Maker inline six-cylinder (I6) 170 cu in (2.8 L) Mileage Maker I6 260 cu in (4.3 L) Challenger V8 (after 1962) |
| Transmission | 2-speed automatic 3-speed manual 4-speed manual |
| Dimensions |
How many Ford Falcons were made in 1962?
Production Figures
| Total Ford Production for 1962 : | 1,476,031 |
|---|---|
| Total 1962 Falcon production : | 396,129 |
| 1962 Ford Falcon | |
| Deluxe Series Futura Sedan 2 dr. 5 P : | 17,011 |
| Deluxe Series Sedan 2 dr. 6 P : | 143,650 |
What was the engine specs of the 1962 Ford 406?
Breathing through a single Holley four-barrel, the 406 had 385 bhp at 5800 rpm and 440 lb-ft of torque at 3800. As the Super High-Performance Tri-Power, it put three Holley two-barrels under a lovely oval air cleaner and was rated at 405 bhp. could replace the standard 3.50:1 cog.
What engines are on the Falcon?
Merlin
Merlin. Merlin is a family of rocket engines developed by SpaceX for use on its Falcon 1, Falcon 9 and Falcon Heavy launch vehicles. Merlin engines use RP-1 and liquid oxygen as rocket propellants in a gas-generator power cycle. The Merlin engine was originally designed for recovery and reuse.
How much is a 1960 Ford Falcon worth today?
Typically, you can expect to pay around $8,040 for a 1960 Ford Falcon in good condition with average spec.
What is the difference between a 406 and a 427 Ford?
Though mid-year 406s and all 427s were cross-bolted main blocks, both were different castings entirely. In fact, the 427 block is a completely different animal because it sports huge 4.23-inch bores, unlike any of its FE siblings, using the 390 and 406's 3.78-inch stroke.
How much is a 1962 Ford Falcon worth?
The value of a 1962 Ford Falcon can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $9,067 for a 1962 Ford Falcon in good condition with average spec.
