What size hitch is on a Ford F350?

The standard Ford F-350 uses a 2-inch by 2-inch hitch receiver (a Class III/IV style depending on the tow package) as the factory bumper hitch on most configurations.

In addition to the standard receiver, Ford offers a Gooseneck/5th-Wheel Prep Package that provides a bed-mounted gooseneck ball (2-5/16 inches) for compatible towing setups. Some owners also opt for aftermarket upgrades, but the common factory setup remains a 2-inch receiver.

Hitch sizes by configuration

The following outlines the common hitch arrangements you’ll encounter on a Ford F-350, highlighting what is standard versus optional.

• Standard factory hitch: 2-inch by 2-inch receiver installed on most F-350 models equipped with the factory tow package.


• Gooseneck/5th-wheel prep option: Bed-mounted gooseneck ball (2-5/16 inches) for compatible gooseneck or fifth-wheel towing; separate from the receiver hitch and requires the appropriate hitch system.


• Aftermarket upgrades: Some owners upgrade to a heavier-duty Class V receiver in 2.5 inches, where the chassis and bumper design allow it; verify compatibility for your year and trim.

Note: Towing capacity and the availability of certain options vary by model year, trim level, cab configuration, and whether the vehicle has the factory tow package or commercial equipment. Always check the door jamb sticker or the owner's manual for the exact specification on your VIN.

Gooseneck and Fifth-Wheel towing options

Beyond the standard receiver hitch, Ford's Gooseneck/5th Wheel Prep Package enables heavy towing by providing a bed-mounted ball and related hardware, enabling 5th-wheel or gooseneck trailers when paired with the correct hitch system. This setup is used for higher payloads and longer trailers than typical bumper receivers handle.

Choosing the right setup

When planning to tow with a gooseneck or fifth-wheel configuration, ensure your truck’s payload, GCWR, and pin weight are compatible with the trailer. Use proper hitch equipment and follow installation and operating instructions from Ford and the hitch manufacturer.

What to check on your specific truck

To confirm the exact hitch size and towing capacity on your Ford F-350, locate the towing sticker near the driver's door jamb and consult the owner's manual. For used vehicles, verify via the window sticker or your dealer using the VIN.

Summary: The Ford F-350 primarily uses a 2-inch receiver hitch, with an optional bed-mounted gooseneck/5th-Wheel prep for heavier towing. Always verify the specific configuration for your year, trim, and tow package, and follow Ford's guidelines for safe towing.

What trucks have a 2.5 inch receiver?

What Type of Vehicles Utilize a 2.5” Receiver Hitch?

• Ford F-250, F-350, F-450 Super Duty.
• Chevy Silverado 2500, 3500.
• Ram 2500, 3500.

What size hitch receiver is a Ford F-350?

An F-350 hitch receiver size varies by model year and trim, with 3-inch receivers standard on many newer, heavy-duty F-350s, while older or some other models may have 2.5-inch or 2-inch receivers. Many 3-inch receivers come with reducing sleeves for use with 2.5-inch and 2-inch accessories, but it's crucial to always measure the receiver directly to confirm its size.
 
Common F-350 hitch receiver sizes

• 3-inch: Often standard on 2017 and newer heavy-duty and dually F-350s. These receivers offer the highest weight ratings and may come with a set of reducing sleeves (3" to 2.5" and 2.5" to 2"). 
• 2.5-inch: Found on many F-350 models before the 2017 change, and on some newer F-250s and other 3/4-ton and 1-ton trucks. 
• 2-inch: Some older F-350s may have 2-inch receivers. 

How to confirm your F-350's hitch receiver size

• Measure it: The most reliable method is to measure the inner opening of the hitch receiver tube with a tape measure. The measurement will be the outside dimension of a ball mount or hitch accessory that will fit snugly. 
• Check the manual: While helpful, owner's manuals can sometimes be misleading, so a direct measurement is always best. 
• Look for a reducer sleeve: If your receiver has a sleeve inside it, the sleeve is for a smaller accessory, and you will need to remove the sleeve to measure the actual receiver size. 

What size hitch pin is a F-350?

2 to 2.50-Inch Receiver Hitch 5/8-Inch Hitch Pin.

What size reciever is on a 2025 F-350?

The standard receiver size for a 2025 F-350 is typically a 2-1/2 inch Class V hitch, especially for those with higher towing capacities. However, some models may be equipped with a smaller 2-inch receiver, often found on Class 4 hitches or for specific vehicle configurations, so it's best to check the specific vehicle's specifications before purchasing an accessory. 
Common receiver sizes for the 2025 F-350

• 2-1/2 inch receiver: This is the most common size for the high-capacity Class V hitches on Super Duty models and is standard on many factory-installed options. 
• 2 inch receiver: This size can be found on some Class 4 hitches or for specific models and configurations, such as cab and chassis versions. 

How to determine your F-350's receiver size

• Check the vehicle's manual: The official vehicle owner's manual will specify the factory receiver size.
• Inspect the hitch: Look for a label or markings on the hitch receiver itself.
• Measure the receiver opening: Use a tape measure to find the dimensions of the opening.
• Consult a dealer: If you're still unsure, a Ford dealership can provide the correct information for your specific truck.