What size hitch is on a Toyota 4Runner?
The size of the hitch receiver on a Toyota 4Runner is typically 2 inches (50 mm).
The current 5th-generation 4Runner (2010–present) generally ships with a 2-inch Class III hitch receiver, and most trims equipped with the factory tow package can tow up to about 5,000 pounds depending on configuration. While the 2-inch size is the standard for most models, confirm your exact setup by checking the owner's manual or asking a Toyota dealer, especially if you’re dealing with a used vehicle or aftermarket modifications.
Identifying the hitch size on your 4Runner
Use these steps to confirm the exact receiver size on your vehicle, especially if you’re shopping used or planning to add towing accessories.
- Measure the inner diameter of the hitch opening; a 2-inch (50.8 mm) receiver is standard for most 4Runners, while a smaller 1-1/4-inch opening would indicate a different setup.
- Check the owner's manual or the window sticker for tow-package specifications that specify “2 in” receiver and a 7-pin wiring harness if equipped for towing.
- Look for a stamping on the hitch crossmember or receiver tube indicating the size (e.g., “2 in”).
Verifying the size ensures you have the correct hitch accessories and avoid compatibility issues when adding a trailer, bike rack, or other equipment.
Towing capacity and related equipment
Hitch size matters, but the ability to tow also depends on engine, drivetrain, and whether your 4Runner has the factory tow package. Here are the key points to know:
- Most 4Runners with the factory tow package use a 2-inch Class III receiver, typically paired with a 7-pin trailer wiring harness.
- With the V6 engine and tow package, the vehicle can tow up to about 5,000 pounds, though exact limits vary by year and configuration; always verify the specific figure in your owner’s manual.
- If your vehicle lacks the tow package, the towing capacity is lower, and you may still have a 2-inch receiver in some trims, but confirm the exact specifications for your year and trim}
In short, a 2-inch hitch is the standard for most Toyota 4Runners, but always verify your exact specifications with official sources when planning to tow anything near the limits.
Summary
Across most generations, the Toyota 4Runner uses a 2-inch hitch receiver (Class III) as the standard hardware. Always verify with your vehicle’s manual or dealer, especially if you own a used model or a specific trim without the factory tow package. When planning to tow, consider both the hitch size and the vehicle’s stated towing capacity, along with the necessary wiring and safety equipment.
Does the 4Runner come with a hitch?
It's worth noting that the 4Runner also comes with a standard towing receiver hitch and a wiring harness with four-pin and seven-pin connectors.
What size hitch receiver is a 2003 Toyota 4Runner?
2" x 2"
2003 - 2006 Toyota, 4Runner, All Styles. Custom Fit Trailer Hitch. Trailer Hitch Specs Fits 2" x 2" Trailer Hitch Receiver. Max gross trailer weight 6,000 lbs.
What trucks have a 2.5 inch receiver?
What Type of Vehicles Utilize a 2.5” Receiver Hitch?
- Ford F-250, F-350, F-450 Super Duty.
- Chevy Silverado 2500, 3500.
- Ram 2500, 3500.
What size hitch is on a 4Runner?
Class 4 Trailer Hitch, 2 Inch Square Receiver, Black, Compatible with Lexus GX470 : Toyota 4Runner.
