What size is the axle nut on a 2014 Dodge Ram 2500?
The axle nut size on a 2014 Dodge Ram 2500 is typically 1-1/2 inches or 38 millimeters. This size is used for both the front and rear axles on this model of truck.
Detailed Explanation
The 2014 Dodge Ram 2500 is a heavy-duty pickup truck that features a robust axle and suspension system to handle heavy loads and towing. The axle nuts play a critical role in securing the wheel hubs and bearings to the axle shafts, ensuring safe and reliable operation of the vehicle.
According to the information gathered from various automotive resources, the standard axle nut size for the 2014 Dodge Ram 2500 is 1-1/2 inches or 38 millimeters. This size applies to both the front and rear axles on this model of truck.
Importance of Proper Axle Nut Size
Using the correct axle nut size is essential for the proper functioning and safety of the vehicle. Incorrect nut size can lead to the following issues:
- Wheel hub and bearing failure due to improper torque and fit
- Uneven tire wear and handling issues
- Potential for the wheel to detach from the vehicle, posing a serious safety hazard
It is crucial to always use the recommended axle nut size and torque specifications provided by the vehicle manufacturer to ensure the safety and reliability of your 2014 Dodge Ram 2500.
What front axle is in a 2014 Ram 2500?
For the 2014 to 2018 model years, all Ram 2500 and Ram 3500 4x4s have the 12 bolt electronic CAD axle. With the higher axle rating and CAD design, many of the parts used on the 2013-2018 12 bolt axle are not interchangeable with the previous axle model.
How much does it cost to replace a wheel bearing on a Ram 2500?
The average cost for a Dodge Ram 2500 Wheel Bearing Replacement is between $439 and $465. Labor costs are estimated between $98 and $123 while parts are typically priced around $342. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
What size is the axle nut on a 2016 Ram 2500?
Or 1 11/16 (43mm) and 1 5/16 (33-34mm).
What size are axle lug nuts?
More than likely if it's a newer one newer axle or if you buy it from Trailer Parts Unlimited. It's going to be 9 16s. And then you have your 5 8 cone nut you'll see these on 8ks 10ks and 12ks.
What size is a transit hub nut?
Rear Hub Nut Socket 65mm - Ford Transit RWD ( -2014) AST6182 is used to remove and install the Rear Hub Nut on Ford Transit RWD models 2006 - 2014.
What size socket is the CV axle hub nut?
38mm Axle Nut Socket - services various full-size vehicles including SUVs.
What size socket do I need for wheel nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size is the front wheel bearing nut on a 2014 Ram 2500?
The front axle nut size on a 2014 Ram 2500 series is 1 and 5 /16 of an inch. This is a very large nut and usually You will need a specialty socket to be able to remove it from the vehicle. I recommend using an impact driver to remove this nut because it is going to be held in place very tightly.
What size are the wheel nuts on a Dodge Ram 2500?
2012-2021 Dodge Ram 2500, 14x1. 5 Original Style Black Lug Nuts - Set of 32. Fits: Factory style replacement lugs for many Dodge, Ram, and Jeep with 14 mm x 1.5 wheel studs and factory aluminum wheels.
What size are the lug nuts on a 2014 Ram 3500?
M14x1. 5 Open End Bulge Acorn Locking Lug Nuts (3/4" and 13/16" Hex)
