What size is the axle nut on a 2016 Chevy Traverse?
The axle nut size on a 2016 Chevy Traverse is 36mm. This is the standard size for the rear axle nuts on this model year of the Traverse SUV.
Detailed Information on the 2016 Chevy Traverse Axle Nut Size
The 2016 Chevy Traverse is a midsize SUV that was produced as part of the vehicle's second generation. For the rear axle assembly, Chevy used 36mm axle nuts to secure the rear wheel hubs to the axle shafts.
This 36mm size is common across many Chevy and GM vehicles from this era, including other models in the Traverse lineup as well as the Equinox, Silverado, and Tahoe. The 36mm nut provides the necessary clamping force to keep the rear wheels properly attached while also allowing for easy removal during tire rotations or other maintenance.
Importance of Proper Axle Nut Torque
It's critical that the 36mm axle nuts on a 2016 Chevy Traverse are tightened to the proper torque specification. If the nuts are under-tightened, it can lead to the rear wheels becoming loose, which is an extremely dangerous condition that increases the risk of an accident.
Conversely, over-tightening the axle nuts can damage the axle shaft, wheel bearings, or other components. The recommended torque for the 36mm rear axle nuts on a 2016 Traverse is 221-258 ft-lbs.
Tips for Replacing Axle Nuts
- Always use a torque wrench to tighten the axle nuts to the proper specification.
- Apply a small amount of thread locker to the nut threads to prevent loosening.
- Inspect the axle nut and threads for any damage before reinstallation.
- Recheck the torque after driving the first 50-100 miles to ensure the nut has not loosened.
Properly maintaining the axle nut torque is an important part of routine Traverse maintenance to ensure safe and reliable operation of the vehicle.
