What size is the CV axle nut on a 2009 Honda Fit?
The CV (constant velocity) axle nut size on a 2009 Honda Fit is 32mm. This nut secures the CV axle to the wheel hub and must be properly tightened to the specified torque to ensure safe and reliable operation of the vehicle.
Detailed Explanation
The CV axle is a critical component in the front-wheel drive system of a Honda Fit. It transmits power from the transmission to the wheels, allowing them to rotate at different speeds as the vehicle turns. The CV axle nut is responsible for keeping the axle securely attached to the wheel hub assembly.
On a 2009 Honda Fit, the correct size for the CV axle nut is 32mm. This size is standard across many Honda and Acura models from that era. Properly tightening the 32mm CV axle nut to the manufacturer's specified torque is essential to prevent the axle from becoming loose or detached, which could lead to a dangerous loss of vehicle control.
Importance of Proper CV Axle Nut Tightening
- Ensures the CV axle remains securely attached to the wheel hub, preventing potential separation and loss of vehicle control.
- Maintains proper wheel alignment and suspension geometry, which is crucial for safe and stable handling.
- Helps prevent premature wear or failure of the CV joint, which could lead to expensive repairs.
- Complies with the vehicle manufacturer's safety and warranty requirements.
Properly tightening the 32mm CV axle nut on a 2009 Honda Fit is a critical maintenance task that should be performed by a qualified automotive technician using the correct tools and torque specifications.
What size socket is the axle nut on a 2008 Honda Civic?
Details. 1 1/4" socket fits the 32mm spindle nut: torque to 134 lb-ft.
Are CV axle nuts reusable?
Can some axle nuts be reused. Yes. But the majority of nuts I'm talking ninety-nine percent of them out there should be replaced when you're replacing a hub unit or the CV axle.
What size is the axle nut on a 2009 Honda Odyssey?
Notes: Axle Nut -- M26 x 1.5, Stake Nut. 2005-2015 Honda Odyssey.
What is a CV axle nut?
On some wheel bearings sets and hub units, the axle nut secures the outer flange to a CV joint or stub axle. As the nut is tightened, it pulls the flange and axle together to set the preload of bearings.
What size socket do I need for wheel nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is the CV axle hub nut?
38mm Axle Nut Socket - services various full-size vehicles including SUVs.
What size are the nuts on a Honda Fit?
The Honda Fit comes equipped with 12mm x 1.5 lug nuts from the factory. This size is standard across all Honda Fit models, regardless of the year or trim level.
What size are the nuts on a Honda Odyssey?
The most common Honda wheel nut sizes are: 12×1.5 – Used on many Honda sedan models like Accord, Civic. The nut measures 12mm diameter with a 1.5mm thread pitch. 14×1.5 – Used on models like Honda Odyssey.
What size is the axle nut on a 2011 Honda Fit?
Notes: Axle Nut -- M22 x 1.5, Stake Nut. 2007-2014 Honda Fit.
What size is the axle nut on a disc Harrow?
Size: 1-1/8 inch hex nut, suitable for various disc harrow gangs. Heavy-duty construction: Engineered for long-lasting performance. Corrosion-resistant: Built to endure harsh agricultural environments. Ideal replacement: Perfect for replacing worn or damaged axle nuts.
