What size is the drain plug on a 2007 Ford Ranger?

The engine oil pan drain plug on most 2007 Ford Rangers uses a 14 mm hex head (equivalent to a 9/16 inch socket) with an M14x1.5 thread. However, exact sizing can vary by engine variant, so always check your specific engine and service manual.

Engine options and typical drain plug sizes

The 2007 Ranger lineup included several engines. The oil pan drain plug size is commonly the same across these engines, but there can be small variations. The following reflects typical sizing for the major engine options.

• 2.3L I4: Oil pan drain plug usually requires a 14 mm hex head (9/16 inch) with M14x1.5 thread.


• 3.0L V6: Oil pan drain plug usually requires a 14 mm hex head (9/16 inch) with M14x1.5 thread.


• 4.0L V6: Oil pan drain plug usually requires a 14 mm hex head (9/16 inch) with M14x1.5 thread.

Note: While 14 mm is the common size for these engines, variations can occur depending on market, sub-model, or aftermarket parts. Always confirm with the service manual or by inspecting the plug head on your specific vehicle.

How to confirm the exact size on your Ranger

To verify the exact size for your particular 2007 Ranger, use these steps. This helps ensure you use the correct tool and avoid damaging the plug.

1. Park the vehicle on a level surface and ensure the engine is cold before draining any oil.


2. Locate the oil pan drain plug at the bottom of the engine oil pan.


3. Try fitting a 14 mm socket first. If it doesn’t fit, you may have a different size; gently test 12 mm and 15 mm sockets to confirm.


4. If in doubt, consult the service manual or a trusted repair database for your exact VIN and engine code.

These steps help you confirm the precise size for your vehicle and prevent cross-threading or damage to the plug or pan.

Additional considerations when changing oil

When performing an oil change, use a new washer if your drain plug requires one, and reinstall the plug to the manufacturer’s torque spec to avoid leaks or stripped threads. If you’re replacing the drain plug due to damage, ensure you obtain the correct size and thread pitch for your engine variant.

Summary

For most 2007 Ford Rangers, the engine oil pan drain plug uses a 14 mm hex head (9/16 inch) with an M14x1.5 thread. Variations can exist among engine options, so always verify with your specific engine code and the official service manual or repair guide. By checking the head size first and then confirming the thread, you can carry out an oil change safely and correctly.

What size is the oil drain plug on a 4.6 Ford?

This oil drain plug fits all 1996-2010 Mustangs with a 4.6L Engine. This drain plug features a 14mm Hex head with a thread pattern of M14-1.5 thread pitch.

What size is the oil plug on a Ford Ranger?

The Ford Ranger oil drain plug size varies by model year and engine, but common sizes are a M12-1.75 thread for newer models (2019+), a 13mm hex head for some 4-cylinder and 4.0L V6 models, and an M14-1.5 thread for other models, such as the 2004 and 1994 Rangers. Always confirm the correct size for your specific vehicle before purchasing a new plug or attempting an oil change. 
Common sizes by model year

• 2019-2024: Often uses a M12-1.75 thread with a 15mm head, which is a common size for newer Rangers. 
• 1998-2011 (2.3L): Frequently uses a 13mm hex head. 
• 1993-2000 (4.0L V6): Commonly has a 13mm hex head. 
• 2004: May use an M14-1.5 thread. 
• 1994: Often has an M14-1.5 thread. 

How to determine the correct size for your vehicle

• Check your owner's manual: This is the most reliable source for your specific model.
• Visually inspect the current plug: Check for markings on the plug itself.
• Measure the head: Use a wrench or socket to measure the size of the hex head.
• Remove the plug and check the threads: If you've already removed the plug, you can measure the threads directly or look up the size using the old plug's specifications. 

What size socket is the oil drain plug?

There is no single socket size for all oil drain plugs, as it varies by vehicle, but common metric sizes are 13mm, 14mm, 15mm, 17mm, and 19mm. To find the correct size, check your vehicle's owner's manual or a set of assorted metric sockets if unsure. 
This video shows how to use different tools to remove an oil drain plug: 1mOn The WorkbenchYouTube · Nov 1, 2024
Common sizes

• Metric: The most common sizes for passenger vehicles are between 13mm and 17mm. 
• SAE: Some older or specialty vehicles may use SAE (inch) sizes, which are often fractional (e.g., 3/8" or 1/2"). 
• Specialty: Some plugs might have a square opening, a hex (Allen/Allen key), or a Torx (star) shape instead of a traditional bolt head. 

How to find the right size

1. Check your owner's manual: This is the most reliable source for your specific car. 
2. Use a socket set: Start with common sizes like 13mm, 14mm, 15mm, and 17mm. A 6-point socket is best as it grips the bolt head more securely. 
3. Visit an auto parts store: You can tell them your vehicle's make and model, and they can look up the correct size. 
4. Try a universal set: If you frequently change the oil, consider buying a specialized oil drain plug socket set that includes common metric and SAE sizes. 

This video explains the importance of using the correct tool to remove an oil drain plug: 1mYour Home GarageYouTube · Nov 24, 2022

What size is the oil drain plug on a 2007 Ford Ranger?

Notes: Engine Oil Drain Plug. M14-1.5" Thread Size.