What size is the drain plug on a 2015 Subaru Forester?
When performing an oil change on your 2015 Subaru Forester, one of the most important details to know is the size of the drain plug. This small but crucial component ensures that the oil pan is sealed properly and allows for easy drainage during maintenance. In this article, we’ll provide you with the exact size of the drain plug and offer some tips for a smooth oil change process.
Drain Plug Size for a 2015 Subaru Forester
The drain plug on a 2015 Subaru Forester typically requires a 17mm wrench or socket for removal. This size is standard for many Subaru models of this era, making it easy to find the right tools for the job. Always double-check the size before starting your oil change to avoid any unnecessary delays.
Tips for Changing the Oil on Your Subaru Forester
Changing the oil on your Subaru Forester can be a straightforward process if you follow these tips:
- Gather the right tools: In addition to a 17mm wrench or socket, you’ll need an oil filter wrench, a drain pan, and a funnel.
- Use the correct oil: The 2015 Subaru Forester typically requires synthetic 0W-20 oil. Check your owner’s manual for confirmation.
- Replace the crush washer: Subaru drain plugs often use a crush washer to ensure a proper seal. Replace this washer during every oil change to prevent leaks.
- Don’t overtighten: When reinstalling the drain plug, tighten it to the manufacturer’s recommended torque specification, usually around 30 ft-lbs. Over-tightening can damage the oil pan threads.
- Dispose of old oil responsibly: Take your used oil to a recycling center or auto parts store that accepts oil waste.
Why Knowing the Drain Plug Size Matters
Having the correct size wrench or socket for your drain plug is essential for a hassle-free oil change. Using the wrong size tool can strip the plug or make it difficult to remove, leading to unnecessary frustration and potential damage to your vehicle. By preparing in advance, you can save time and ensure your Forester stays in top condition.
Conclusion
For a 2015 Subaru Forester, the drain plug size is 17mm, and knowing this detail can make your oil change process much smoother. Always ensure you have the right tools and follow best practices to keep your vehicle running efficiently. If you’re ever in doubt or need assistance, don’t hesitate to reach out to a trusted auto repair shop like Kevin’s Autos for professional help!
Frequently Asked Questions
What size is the oil drain plug on a 2015 Subaru Outback?
The 2015 Subaru Outback oil drain plug size is 17 mm head. Your oil needs to be changed out someday. Every 5,000 to 10,000 miles or so is a good rule of thumb. If You don't replace it, there will be problems with the engine.
What size socket for Subaru Outback oil plug?
Shop Subaru Outback Engine Oil Pan Drain Plug. Plug 16X17.
What is the torque on the oil drain plug on a 2015 Subaru Outback?
Torque: 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.
What size wrench is the oil drain plug on a 2014 Subaru Forester?
Unscrew the oil drain plug with the 17mm wrench. This is located under the front of the car in the gap in the bottom panel.
What size socket is my drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size socket for Subaru Forester oil drain plug?
typically 18-24 for a drain plug bolt.
Where is the drain plug on a 2015 Subaru Forester?
Unscrew the oil drain plug with the 17mm wrench. This is located under the front of the car in the gap in the bottom panel. Adjust the placement of the oil pan if necessary. Allow the oil to completely drain into the oil pan.
What size is a Subaru oil drain plug?
16X17
Plug 16X17. Confirm, Contact.
What size is the oil drain plug on a 2015 Subaru Forester?
Plug 16X17. Confirm, Contact.
Can I put 5w30 instead of 0w20 Subaru Outback?
Like the Crosstrek, the oil for the Subaru Outback needs to be an API classification SN or ILSAC GF-5. Also like the Crosstrek, the Outback engine should be filled with 0W-20 synthetic oil. If synthetic oil isn't available, you can use either 5W-30 or 5W-40 conventional oil.
