What size is the drain plug on a Ford EcoSport?
For most EcoSport models, the oil drain plug uses a metric M14 x 1.5 thread and a 14 mm socket head. This configuration is common across several engines, but sizes can vary by engine and model year. Always verify with your owner's manual or parts diagram for your exact vehicle.
Engine variations and common sizes
Because the EcoSport has been offered with multiple engines across different markets, the drain plug size can vary. The typical setup is M14 x 1.5 with a 14 mm hex head, but some engines or regions may use a different thread. Confirm for your exact model before maintenance.
- Thread size (typical): M14 x 1.5
- Drain plug head: 14 mm hex socket
- Possible exceptions: some markets/engines may use M12 x 1.25 or M16 x 1.5
- Verification: consult the owner's manual, Ford service diagrams, or a dealership parts fiche
Note: While M14 x 1.5 with a 14 mm head is standard on many EcoSport engines, always verify for your specific engine and year to avoid damage from an incorrect plug.
How to confirm the correct size for your EcoSport
To ensure you have the right drain plug size for your exact vehicle, follow these steps:
- Check the owner's manual lubrication section for the drain plug specification.
- Identify your engine code and model year, then consult Ford's official service diagrams or parts catalogs for the precise drain plug thread.
- Inspect the current drain plug: fit a 14 mm socket to verify the head size, and measure the thread with a caliper or thread gauge if needed.
- If the plug doesn’t fit, stop and verify the correct size before proceeding to avoid cross-threading.
- When replacing, use the correct thread pitch and apply the proper torque specification per Ford guidance.
Market notes: Some regions use different engines that may employ alternate drain plug sizes; rely on VIN-specific documentation or a dealer for confirmation.
Summary: The drain plug on many Ford EcoSport models is typically M14 x 1.5 with a 14 mm hex head, but variations exist by engine and year. Always verify using official manuals or dealer resources for your exact vehicle.
What size socket is a Ford drain plug?
The most common thread size of the oil drain plug on a Ford car is M12x1. 75mm. As a thumb of rule, there is not a universal oil drain plug that works well for all Ford cars.
What size is the drain plug on a 2.3 EcoBoost?
M12 X 1.75
Engine Oil Drain Plug Pan - M12 X 1.75.
What size socket do I need for my drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size socket is the 3.5 EcoBoost drain plug?
You need a 15mm socket to remove the oil pan plug. If you have the undercarriage screen by Ford, you'll need an 8 MM socket to take it off.
