What size is the drain plug thread on a Honda Civic?
The drain plug thread size on a Honda Civic is typically 14mm x 1.5. This is a common size for many Honda and Acura vehicles, as well as other Japanese car models.
Drain Plug Thread Size Explained
The drain plug on a Honda Civic is responsible for allowing the engine oil to be drained during an oil change. The thread size refers to the diameter and pitch of the threads on the drain plug. In the case of a Honda Civic, the drain plug has a diameter of 14mm and a pitch of 1.5mm, meaning the threads make 1.5 revolutions per millimeter.
This 14mm x 1.5 thread size is a standard specification used by Honda and other Japanese automakers. It ensures a secure and leak-free connection between the drain plug and the oil pan on the vehicle.
Importance of Proper Drain Plug Size
- Leak Prevention: Using the correct drain plug size is crucial to prevent oil leaks. An improperly sized plug may not seal tightly, leading to messy and potentially damaging oil leaks.
- Ease of Removal: The 14mm x 1.5 thread size allows for easy removal and reinstallation of the drain plug during oil changes.
- Compatibility: Using the correct drain plug size ensures it will fit properly and thread into the oil pan without issue.
Knowing the proper drain plug thread size for your Honda Civic is an important piece of information for DIY mechanics and those performing routine maintenance on their vehicle.
What size wrench for Honda oil drain plug?
The drain plug is located on the back of the oil pan and takes a 17mm socket or wrench.
What size is the oil drain plug on a Honda Civic?
17 mm
Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack (Part No. 090-033.1)
What size socket is a Honda Civic plug?
14mm Spark Plug Socket.
What size is a Honda Civic drain plug?
Accufit – Oil Drain Plug, M14 x 1.5 (Part No. ODP-00007B)
What size socket for Honda drain plug?
If you needed a new plug, it looks like it's an M14x1. 5.
What size is the oil drain plug washer on a Honda?
14mm
Oil Drain Plug Washer 14mm.
What size is the oil plug on a Honda Civic?
M14 x 1.5
Accufit – Oil Drain Plug, M14 x 1.5 (Part No. ODP-00007B)
What size socket is my drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size socket do I need to remove a drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
Are all Honda drain plugs the same size?
14 mm. It is the same as on all the Hondas and Acuras.
