What size is the drive shaft bolt on a Toyota Yaris?
The drive shaft bolt size on a Toyota Yaris is typically 14mm. This is the standard size used for the drive shaft connection on this model of vehicle.
Detailed Information on the Toyota Yaris Drive Shaft Bolt
The drive shaft is a critical component in the Toyota Yaris, responsible for transmitting power from the transmission to the rear wheels. The drive shaft is connected to the transmission and differential using bolts, and the size of these bolts is an important factor in ensuring the proper functioning and safety of the vehicle.
According to the information gathered from various automotive repair and maintenance sources, the drive shaft bolt size on a Toyota Yaris is generally 14mm in diameter. This size is common across many Toyota models and is designed to provide a secure and reliable connection between the drive shaft and the other drivetrain components.
Importance of Proper Drive Shaft Bolt Maintenance
Maintaining the proper torque and condition of the drive shaft bolts is crucial for the safe operation of the Toyota Yaris. If the bolts become loose or damaged, it can lead to a range of issues, including:
- Vibrations or shaking in the drivetrain
- Potential failure of the drive shaft, leading to loss of power and control
- Increased wear and tear on other drivetrain components
- Safety risks, as a failed drive shaft can cause the vehicle to become uncontrollable
It is recommended to have the drive shaft bolts inspected and tightened to the manufacturer's specified torque during regular maintenance intervals, typically every 30,000 to 60,000 miles or as recommended by the vehicle's service schedule.
Conclusion
In summary, the drive shaft bolt size on a Toyota Yaris is typically 14mm in diameter. Proper maintenance and inspection of these bolts is crucial for the safe and reliable operation of the vehicle. By ensuring the drive shaft bolts are in good condition and properly torqued, Toyota Yaris owners can help prevent potential issues and maintain the overall performance and safety of their vehicle.
What size socket is a Toyota lug nut?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
What size is the hub nut on a Toyota Yaris?
Correct - 12 pt, 30 mm.
What size bolt is a Toyota Yaris drive shaft?
Correct - 12 pt, 30 mm.
What size socket is a Toyota Yaris wheel nut?
Technical Information
The vehicle of the hub bolts M12 X P1. 5, with the mounting nut locus 60 ° taper seat of the wheel, the diameter of the nut hole is 21mm or more of the wheel wearing car (can not be used in the Toyota genuine wheel.)
What size socket do I need to remove an axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What size is the CV axle nut on a 2016 Toyota Corolla?
Toyota uses 30 mm, 32 mm, and 36 mm size nuts for the CV axle.
What size are the nuts on a Toyota Yaris?
Thread size M12 x 1.5. 4 X ALLOY WHEEL NUTS - TOYOTA, YARIS. Fits all standard alloy wheels.
What size socket fits a Toyota axle nut?
The axle nut is 30mm 12 point. You will need a Deep 30mm 12 point socket. Alternative deep sockets that will work are a deep 33mm 6 point and a deep 1 3/16" 12 point.
What size socket is needed to remove a CV axle?
36mm is correct. Make sure it's attached to a decent breaker bar; those things are on there pretty tight.
What size is the drive shaft nut on a Toyota Yaris?
It requires a 30mm socket and a tool for un-denting the part that gets dented against the slot in the axle.
