What size is the oil drain plug on a 2007 Toyota 4Runner?
The oil drain plug size on a 2007 Toyota 4Runner is 17 mm. This is the standard size used for the oil drain plug on this model year of the popular midsize SUV.
Detailed Information on the 2007 Toyota 4Runner Oil Drain Plug
The 2007 Toyota 4Runner is equipped with a 17 mm oil drain plug, which is a common size for many Toyota and other Japanese vehicle models. This size plug allows for easy oil changes and maintenance on the 4Runner's 4.0-liter V6 engine.
When performing an oil change on a 2007 Toyota 4Runner, it's important to use the correct size oil drain plug to avoid stripping the threads or causing any other damage. Using the wrong size plug can lead to oil leaks and other issues.
Tips for Changing the Oil on a 2007 Toyota 4Runner
- Locate the oil drain plug, typically located at the bottom of the oil pan
- Use a 17 mm socket or wrench to loosen and remove the plug
- Drain the old oil completely before replacing the plug
- Apply a small amount of thread sealant to the plug threads before reinstalling
- Tighten the plug securely, but do not overtighten
- Fill the engine with the recommended amount and type of new oil
- Dispose of the old oil properly
Following these steps and using the correct 17 mm oil drain plug size will help ensure a successful oil change on a 2007 Toyota 4Runner.
What size is the oil drain plug on a 2005 Toyota 4Runner?
Drain the Old Engine Oil
Once the 4Runner has been raised safely, you can slide under with a creeper and undo the drain plug (Figure 3) with a 14 mm socket (Figure 4).
How to find out oil drain plug size?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size socket is the drain plug on a 4runner?
The thread size is metric M12-1.25.
What size socket fits an oil drain plug?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
What size ratchet do I need for an oil change?
Ratchet and Socket Set
Get a set that includes some metric and SAE sizes, and if you're starting out, a 3/8” drive should do just fine.
What plugs does Toyota use?
Toyota offers a variety of spark plugs designed specifically for your vehicle's engine, including U-Groove, Dual-Ground Electrode, Double Platinum and even Iridium spark plugs.
How many quarts of oil does a 2007 4Runner take?
5.5 quarts
What size is a Toyota drain plug?
BOTH drain plugs on this car use a 14mm head. The oil drain plug on the passenger sde next to the oil filter is silver in color and faces the back of the car. The transmission drain plug on the driver side is a 14mm also and faces straight down.
What size is the drain plug on a 2009 Toyota 4Runner?
Locate the 14 mm hex oil drain plug. The drain plug is underneath the truck in the middle of the plate after the skid plate. Place an oil drain pan under the oil drain plug. Be sure to position the drain pan so that it will catch the oil when it is streaming out of the pan.
How do I know what size drain plug I have?
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
