What size is the oil drain plug on a 2017 Chevy Traverse?
The oil drain plug size on a 2017 Chevy Traverse is 17mm. This is the standard size for the oil drain plug on this model year of the Traverse SUV.
Detailed Information on the 2017 Chevy Traverse Oil Drain Plug
The 2017 Chevy Traverse is a midsize SUV that was part of the second generation of the Traverse model, which was introduced in 2013. For the 2017 model year, the Traverse came equipped with a 3.6-liter V6 engine that required regular oil changes.
To change the oil on a 2017 Traverse, you'll need to locate the oil drain plug, which is typically located at the bottom of the oil pan. This plug is responsible for allowing the old oil to drain out when performing an oil change.
Steps to Change the Oil on a 2017 Chevy Traverse
- Park the vehicle on a level surface and apply the parking brake.
- Locate the oil drain plug, which is a 17mm hex bolt at the bottom of the oil pan.
- Place a drain pan underneath the oil drain plug to catch the old oil.
- Using a 17mm socket or wrench, loosen and remove the oil drain plug.
- Allow the old oil to fully drain from the oil pan.
- Once drained, replace the oil drain plug and tighten it back up using the 17mm tool.
- Refill the engine with the recommended amount and type of new oil.
- Start the engine and check for any leaks around the oil drain plug.
It's important to use the correct 17mm size oil drain plug when servicing a 2017 Chevy Traverse to ensure a proper seal and prevent any leaks. Following these steps will help ensure a successful oil change on your Traverse SUV.
Are oil drain plugs universal size?
Let's get one thing straight: oil drain plugs are not universal. Just because an oil drain plug has the thread pitch you need for a vehicle, that doesn't mean it will work with the oil drain pan. Here's what you need to know about oil drain plugs and gaskets so you can select the right replacements.
What size is the drain plug on a 2017 Chevy Colorado?
Notes: Engine Oil Drain Plug. M12 x 1.75 thread.
How do I know what size drain plug I have?
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size wrench for changing oil?
3/8″
Just use a wrench, or even better, a 3/8″ ratchet with the right socket on it until the plug is tight to the pan. Then just give it a good 1/4 turn like dad used to say!.. Don't overthink an oil change.
How much oil does a 3.5 traverse take?
6 quarts
Pour 6 quarts of new oil. Reset the oil change button in your Chevy Traverse. Start your engine. Let the engine idle for 5 minutes to let the new oil circulate.
How much oil does a 2017 Chevy Traverse 3.6 L take?
6 quarts
Capacity: 6 quarts (with filter). After refill check oil level.
What socket do you need for oil change?
Ratchet and Socket Set
Get a set that includes some metric and SAE sizes, and if you're starting out, a 3/8” drive should do just fine. Ratchets and sockets also come in 1/4, 1/2″, 3/4″, and 1” drives.
What size socket do I need to remove an oil plug?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
How to find out oil drain plug size?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size is a Chevy drain plug?
2 Pcs Oil Drain Plug M12-1.75, 15mm Hex Head T45 Torx Compatible with 2013-2022 GMC, Buick, Cadillac, Chevrolet, Replace GM 55577568, 090-948, 090948.
