What size is the oil drain plug on a Dodge Challenger?
The oil drain plug size on a Dodge Challenger is typically 3/4 inch or 19 millimeters. This is the standard size for most Dodge vehicles, including the Challenger model.
Understanding the Oil Drain Plug
The oil drain plug is a crucial component in the oil change process for any vehicle. It is located at the bottom of the oil pan and is responsible for allowing the old oil to be drained from the engine before fresh oil is added. The size of the drain plug is an important factor to consider when performing an oil change, as using the wrong size can lead to leaks or even damage to the oil pan.
Dodge Challenger Oil Drain Plug Specifications
The Dodge Challenger, like many other Dodge models, typically uses a 3/4 inch or 19 millimeter oil drain plug. This size is common across the Dodge lineup, making it easy to find replacement parts and ensuring a proper fit when changing the oil.
It's important to note that while the 3/4 inch or 19 millimeter size is the standard, there may be some variations depending on the specific model year and engine configuration of your Dodge Challenger. It's always a good idea to consult your owner's manual or a trusted mechanic to confirm the exact size for your vehicle.
Changing the Oil Drain Plug
When changing the oil in your Dodge Challenger, follow these steps to properly remove and replace the oil drain plug:
- Locate the oil drain plug, typically located at the bottom of the oil pan.
- Use the appropriate size wrench or socket (3/4 inch or 19 millimeter) to loosen and remove the plug.
- Allow the old oil to fully drain from the oil pan.
- Clean the threads of the oil drain plug and the oil pan to ensure a proper seal.
- Replace the oil drain plug, tightening it securely with the wrench or socket.
- Check for any leaks and tighten the plug further if necessary.
Following these steps will help ensure that your Dodge Challenger's oil drain plug is properly installed and that your oil change is completed successfully.
What thread bolt is on the 2015 Dodge Challenger SXT oil drain plug?
Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 13 mm Head, 1 Pack (Part No. 090-938CD)
Are all oil drain bolts the same size?
It's called the oil drain plug, and there is no single size. There are hundreds of different sizes. The auto parts store will be able to tell you what size you have, based on year, make, model, and engine, and can get you a replacement plug. Make sure you know whether your car uses metric or SAE, too.
What size is the oil plug on a Dodge Challenger?
5mm and head size 13mm.
Are oil drain plugs universal size?
Let's get one thing straight: oil drain plugs are not universal. Just because an oil drain plug has the thread pitch you need for a vehicle, that doesn't mean it will work with the oil drain pan. Here's what you need to know about oil drain plugs and gaskets so you can select the right replacements.
What size is a Dodge drain plug?
The thread size of the oil drain plug on a RAM1500 is M14x1. 5mm.
What socket do you need for oil change?
Ratchet and Socket Set
Get a set that includes some metric and SAE sizes, and if you're starting out, a 3/8” drive should do just fine. Ratchets and sockets also come in 1/4, 1/2″, 3/4″, and 1” drives.
What size is the oil socket on a Dodge Charger?
Replace the worn-out or damaged plug in your Charger with this new Oil Drain Plug featuring pilot point style with a thread size of M14-1.50. The precise thread diameter, thread pitch, and the 16 mm hex design plug up the hole in the drain pan perfectly.
What size is the oil bolt on a Dodge Challenger?
5mm and head size 13mm.
What size socket fits an oil drain plug?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
How to find out oil drain plug size?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
