What size is the oil filter wrench on a 2017 Lexus RX350?
The standard oil filter housing on the 2017 Lexus RX350 uses a 65 mm, 14-flute cap-style wrench to remove the cartridge-style filter. This is the typical size you’ll need for a DIY change, though regional variations or aftermarket caps can differ, so verify for your exact vehicle if needed.
In the 2017 RX350, powered by the 3.5-liter V6 (2GR-FKS), the oil filter is a cartridge type housed in a canister. Replacing it requires removing the housing cap with a dedicated wrench, then swapping the filter and O-ring. While the 65 mm, 14-flute configuration is the common setup, some markets or builds may use a slightly different cap, so checking your manual or confirming with a dealer is wise if you’re unsure.
Tool size for the RX350 oil filter
The following is the size most owners use to remove the oil filter housing cap on a 2017 RX350:
- 65 mm oil filter housing cap wrench with 14 flutes (65mm/14-flute cap wrench)
Using the correct 65 mm, 14-flute wrench ensures the cap engages properly with the canister cap and prevents damage to the housing. If the cap doesn’t match this size, consult the service manual or your Lexus dealer to confirm the exact specification for your vehicle’s VIN and market.
Summary
For a 2017 Lexus RX350, the recommended oil filter wrench size is typically a 65 mm, 14-flute cap wrench to remove the cartridge-style oil filter housing. Always verify against your vehicle’s service manual or dealer if you’re unsure, as regional variations can occur.
