What size lug bolts are on a Honda CRV?
The standard lug bolt size for a Honda CR-V is 12x1.5 mm. This means the lug bolts have a diameter of 12 millimeters and a thread pitch of 1.5 millimeters.
Detailed Explanation
The Honda CR-V is a popular compact SUV that has been in production since 1995. Like most vehicles, the CR-V uses lug bolts to secure the wheels to the vehicle's hubs. Lug bolts are the threaded fasteners that go through the wheel and into the hub, holding the wheel in place.
The specific size of the lug bolts used on a Honda CR-V can vary slightly depending on the model year and trim level, but the most common size is 12x1.5 mm. This means the lug bolts have a diameter of 12 millimeters and a thread pitch of 1.5 millimeters.
Why Lug Bolt Size Matters
Knowing the correct lug bolt size is important for a few reasons:
- Wheel Fitment: Using the wrong size lug bolts can prevent the wheel from fitting properly on the vehicle's hub, which could lead to the wheel becoming loose or even falling off while driving.
- Torque Specifications: Lug bolts need to be tightened to the proper torque specification to ensure the wheels are securely attached. Using the wrong size lug bolts can make it difficult to achieve the correct torque.
- Replacement Parts: If you need to replace a lug bolt, you'll need to ensure you get the correct size to fit your Honda CR-V.
It's always a good idea to consult your owner's manual or contact a Honda dealer to confirm the exact lug bolt size for your specific CR-V model and year.
What size are the lug nuts on a Honda CR-V?
Acorn Nut. With M12 - 1.50 Threads.
What size are the nuts on a Honda CR-V?
Thread Size: M12-1.5.
What size are lug bolts?
The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size socket takes off lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is my lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is a Honda HRV lug nut?
12 mm x 1.50 thread size, 3/4" and 13/16" hex.
What size socket for Honda lug nuts?
To properly remove and install Honda lug nuts, you'll need a socket that matches the nut size. The most common Honda wheel socket sizes are: 19mm – Fits 12×1.5 lug nuts. 22mm – Fits 14×1.5 lug nuts.
